|03-27-2013 11:35 AM|
4 knuckles...and 3 tierods? Why exactly do you need to replace the knuckles ? Ball joints is one thing, but what is wrong with the knuckles? Also, why so many tie rods lol?
|03-27-2013 11:27 AM|
|Richlw3||Thanks guys! I'm replacing them because they have 200.000 miles on them and the steering is terribly sloppy. I'm also doing a tie rod flip and lowered pitman arm. The parts are stock replacement stuff I found on eBay $55 for everything 4 knuckles and 3 tie rods. I don't expect the jeep to last much longer so cheapo parts is all ill buy.|
|03-27-2013 10:13 AM|
|03-27-2013 09:53 AM|
That is your drag link. I don't believe that end is rebuildable, therefore you have to replace that whole section. The link on the other end (that attaches to the pitman arm) can be replaced.
Also, why are you replacing your knuckles? What are you replacing them with?
|03-27-2013 09:43 AM|
That would be a Tie Rod End, check out Quadratec's web site for an exploded view.
It lists several different ones depending on right/left side.
|03-27-2013 08:43 AM|
What is this part? Tie rod? Knuckle?
I'm replacing the tie rods and knuckles. I can't figure out what this part is called, it's the the knuckle attacked to the drag link. Can it be replaced or is a part of the drag link?