|09-05-2013 07:22 PM|
I thought I would contribute to this thread...
I picked up a full set of these doors with 4 bags included for 1000$. They are in really good shape and apparently were only used once...older guy bought them and hated the noise.
Ordered a set of mirrors from part source with 1 day delivery for 65$/mirror. Finding the bolts to fit was a pain and once mirrors installed with spacers I noticed that when the door closes the bolt head rubs on the end of the dash panel. I hope it doesn't create large scars from opening/closing.
First thoughts are that I like them...but they are new and the novelty of them is still 'neat'. They rattle slightly but only over large bumps like rail tracks and less so when the uppers are on.
When I adjust the uppers to fit snug at the top of the door frame I find it compromises the fit at the bottom...which secures with Velcro. I picked up some 2'' industrial Velcro to hopefully help with the seal...we'll see when I get around to doing it.
I didn't like the metallic look so I plasti dipped them but apparently did a crappy job because they look streaked.
Kramer have u done anything different to seal the bottoms? There is significant light showing through at the edges and i can see me getting soaked during a rain....
|04-27-2013 06:30 PM|
I've just about decided against these doors from the reviews I've found.
My soft doors will work for now. May save up for mopar half doors down the road.
|04-27-2013 06:07 PM|
|JeepHerz||A note of caution- the paint is chipping off my OEM doors on the edges from removal. Impossible to touch up. And I typically use work gloves. Buying a longer pin system so they're easier to line up. Plus those stupid door edge protectors. I already beat it up enough on the trail.|
|04-27-2013 04:30 PM|
|04-27-2013 03:36 PM|
|04-27-2013 03:34 PM|
|Timjeep||Found one picture with painted element doors. A member on the forum, Blackbeard1718 posted this in 2009. Looks good to me. But this is the only information I can find on someone that has painted the doors. I too need to pull the trigger on them. Need to find someone to paint them. Not concerned about the uppers everyone bitches about. I'll just watch the weather as I do now when I put my element tubes on.|
|04-27-2013 12:21 PM|
Same as OP. Want mopar half doors but they cost a bundle. Figured I'd go with the painted elements instead. And if/when they get scratched up ill just rinoline them.
Just can't get myself to pull the trigger and order them.
|04-07-2013 06:34 AM|
Nice picture of the JPi rig with the enclosure kit. I've been looking for more pictures of those installed.
|04-06-2013 06:35 PM|
|04-06-2013 06:33 PM|
|JPi4.0||They have some quirks but are great for the money.|
|04-06-2013 06:12 PM|
Kramer, which seller on eBay did you buy the mirrors from? I searched on ebay and couldn't find the ones that looked like the factory ones. I've used the rugged ridge round mirror that mounts on the windshield frame, but don't really like the way it looks with the Bestop doors. I looked at Bestop mirrors, but the reviews on Amazon were bad.
|04-03-2013 11:53 PM|
|rics1997||This is high on my next Mod list. Been wanting them for some time now|
|04-03-2013 11:48 PM|
My only complaint about the element doors is the door straps. They have tiny opening that it took more time to slip them into the door hook then the whole installation process. I almost gave up and was going to email Bestop they gave me faulty straps
I also recommend using 03-06 TJ mirrors replica, cheaper and don't stick out inside that much. I couldn't find black fender washers to match black paint though.
|04-03-2013 10:15 PM|
|Texas_Jeep||This is on my short list too. These look great|
|04-03-2013 07:49 PM|
My eBay OEM style replica mirrors came in today and I got them mounted up to my Bestop Element doors.
I love these mirrors. They're exactly the same as the OEM mirrors, being manually adjusted as the only discernible difference.
The finish on them is great and I love how that finish perfectly matches with the new matte black finish on the Element doors.
The doors don't come with hardware to mount mirrors, nor the mirrors I bought. I made a trip to HD and came out with exactly what was needed.
You need 4 M8x1.25x30mm bolts and 4 lock washers.
It worked out great that these were cap screws and already black. I had planned to paint the heads black to match the mirror mounting cups.
You put the mirrors through the two large holes in the door and mount the cup on the back like so:
Of course better quality daytime pictures will come. These doors just got better with the addition of these mirrors. You can't beat them for $60 for the pair and they are on solid and match great.
|03-28-2013 08:35 PM|
Kramer, we had this discussion a couple months ago on the forum. I like the Bestop doors I have. Waiting on you to get the enclosures, so you can tell me how you like them! I have been soooo close several times on buying the enclosures from quadratec already painted (they've been in my cart several times)........ I need to man up and just do it
I really like the looks of the enclosures. Cheaper alternative to half doors.
|03-28-2013 10:24 AM|
|termite||Nice. I came very close to buying a set this year (fronts and rears) but picked up a Rampage Recovery bumper and JKS quick disconnects instead. Still on my short list of stuff to get.|
|03-28-2013 10:20 AM|
|03-28-2013 10:03 AM|
They're the door hangers from SkinnyPedal.net. Awesome hangers.
|03-28-2013 09:40 AM|
|03-28-2013 08:29 AM|
Thanks for posting. They look great! I've also been wanting a set but it is one of those mods I haven't been able to bring myself to do.
It looked like your doors are hanging in the background. What door hangers are you using? I think that is one of my main reasons for not getting a set. Every wall in my garage has bikes hanging on it and I don't know where I'd keep 8 doors. I have a shed but it is full of lawn equipment and kids bikes. Not sure I could make them fit or that I want to as the kids are in and out of it all the time
|03-28-2013 08:09 AM|
Love these - have had my eyes on a set since last Nov. when I bought my Jeep.
One of these days...
|03-28-2013 07:57 AM|
|tiger3||Very Nice! Thanks for the valuable info!|
|03-27-2013 08:58 PM|
Bestop HighRock Element Doors Review
I've been wanting half doors probably about a week after taking delivery of my JKUR. The Mopar half doors are incredibly expensive so I began looking around for alternatives.
I finally decided on the Bestop HighRock Element doors since they offer so many configurations and versatility.
I will build up along the way and eventually add the enclosure panels and bags. I may eventually get the uppers but it's not a certainty. Since this isn't my DD I don't usually drive in inclement weather. Sure, we get pop-up storms here in NE FL but it's nothing I can't just wait out or power through.
They showed up today like this.
And are packaged nicely in plastic and foam.
Here's the small hardware that comes with the front doors. You have your keys, limiting straps, latch panels, and mirror mounts.
The latch plate assembled on the door.
Showing some of the welds and detail.
Assembled and on the Jeep.
I had originally planned to paint the doors Commando Green to match my Jeep but I'm thinking I like the black better.
As documented by many comments around the internet these do have some rattle when assembled and latched on the Jeep's latch.
I added some black tape to the latch and it alleviates the play in the latch.
The doors swing sturdy and true on the hinges without any play. The welds look clean and the finish is nice and uniform.
I'll update this thread when the rears arrive and as the doors evolve into their many configurations.