|03-28-2013 03:22 PM|
|03-28-2013 02:43 PM|
|03-28-2013 02:42 PM|
|03-28-2013 12:04 PM|
|03-28-2013 09:04 AM|
|chipmonk66gt||Just a question, but why do you want to keep stock height?|
|03-28-2013 08:52 AM|
35s on stock suspension and Spidertrax spacers. For daily driving there was no rubbing anywhere.
I did lift it 2.5" with an AEV kit so I could flex off road though.
|03-28-2013 06:17 AM|
|ilikeguns||if your air dam is still on, you'll probably need to trim it. I'm running 35s with the TF leveling kit and the Pintlers (5.2"BS). I had to trim my flares but glad that I did!|
|03-28-2013 02:37 AM|
|03-28-2013 02:15 AM|
I'm running a Tera flex leveling kit, Ace flat fenders, my rims have 3.5" back spacing and Nitto trail grapplers 35". I did have to and 1" of bump stop to front and rear for clearance but didn't need to trim pinch seams.
|03-28-2013 02:12 AM|
|Hgarza3||@sleipnier thanks man I'm no where near do e though. You got a pretty good looking rig yourself|
|03-28-2013 02:06 AM|
|Farnham21||Just get a lift not that big a deal. Teraflex makes a quality budget boost for like 400 or less. Or a kit with coils for 486|
|03-28-2013 01:56 AM|
|03-28-2013 01:49 AM|
|flyinion||From what I understand, flat fenders and wheel spacers should have you set. Metal Cloak makes a high clearance fender that you can supposedly run a 37 on the stock suspension if you really wanted to but they're not cheap and don't offer much coverage over the tire if you live in a State where that's an issue. You may or may not have to trim the pinch seam with 35's. From what I've read around here the issue seems to be more with if you have lifted and don't have adjustable control arms to re-center the wheels because the lift with factory CA's will pull the wheel towards the pinch seam.|
|03-28-2013 01:48 AM|
|03-28-2013 01:43 AM|
|03-28-2013 01:38 AM|
Seriously though, Thanks for the answers guys.
If I start chopping away the body, would that help, or is there just tons of other parts still going to get in the way? I'm willing to put money into achieving this, I am all for replacing the suspension if I have to, but I want to keep it at stock height.
|03-28-2013 01:26 AM|
|Hgarza3||^only mod is a stubby bumper without it I would rub like hell on full turn. With stubby bumper I have zero rub at full turn|
|03-28-2013 01:24 AM|
|Hgarza3||Stock with 35 no lift. Only rubbing Is when someone is sitting in the back and I go I've a bump. Getting a lift this weekend though.|
|03-28-2013 01:23 AM|
this is a silly thread. 35s can fit, but will rub on everything. You won't have any room for flexing.
If you want 35s, get a 2.5lift.
|03-28-2013 01:20 AM|
|Farnham21||There is no good flex on stock suspension. These are things that will prevent you from rubbing during full turns and large bumps. You will not be flexing like a lifted jeep just cause you have 35s. Tires don't max your flexibility better, shocks and coils do.|
|03-28-2013 01:05 AM|
|SLEIPNIR||Okay. Are the fenders and the pinch seam the only thing stopping a good flex with 35s on stock suspension?|
|03-28-2013 12:54 AM|
|Farnham21||Chopped or flat fenders for sure|
|03-28-2013 12:46 AM|
|03-28-2013 12:42 AM|
What mods are needed for 35s w/ no lift.
What would I need to cut, remove or add in order to pull off 35s while keeping the jeep as low as possible?