|03-28-2013 08:43 PM|
|03-28-2013 03:10 PM|
There you go.
|03-28-2013 03:09 PM|
And cue random google image pics...That's the cap
And the filter attached to it:
Easiest oil change you'll ever do!!
|03-28-2013 02:23 PM|
|DurbJKU||And what is this we speak of? Haven't had my oil change come up yet. Different oil filter?|
|03-28-2013 02:21 PM|
|03-28-2013 12:46 PM|
|jadmt||believe it or not if you look at the top of the canister it will tell you what ft/lbs of torq is required. It is more then you would think but it has worked for me on 3 changes so far.|
|03-28-2013 12:20 PM|
|legitposter||Yeah I basically screwed it down all the way until it was impossible to screw it down anymore and stopped there. No actual torqueing.|
|03-28-2013 12:05 PM|
|03-28-2013 11:40 AM|
|enjerhoo||just until you contact the O-ring. Don't squash it, just come into contact plus a hair to make the seal.|
|03-28-2013 11:38 AM|
Torque on oil filter canister nut 3.6 engine?
What is the correct tightening procedure for the oil filter canister nut on the 3.6 engine. Torque? Or do you just tighten it similarly to the old screw on type?