|04-17-2009 07:06 PM|
|04-17-2009 06:46 PM|
|BARKDOG67||Yeah I'm going to do the zj tie rod here in a couple weeks they are way more heavy duty than are stock ones are.|
|04-17-2009 05:52 PM|
some of the upgrades in the budget junkyard upgrades are pretty cool.. when i get around to it im gonna find the alternator that they swap into the tjs.. i cant remember how much bigger than stock it is tho.. but i remember reading that forum a few months back
|04-17-2009 05:31 PM|
|04-17-2009 03:21 PM|
|04-17-2009 02:19 PM|
|pyro||jgano23 & jeeperman I was joking around. I was interested to read the answers to his questions because I am thinking on some of the same things. Basicly it was a bump. O by the way it kinda worked|
|04-17-2009 01:31 PM|
|04-17-2009 01:25 PM|
As far as the easy swap, a TJ dana 44 would be a bolt in job. Just make sure the gears match your front axle.
The XJ 44, can be added, but you will need to weld on all the brackets, much like you would for the 8.8 swap.
The ZJ 44 is an odd ball 44, nothing matches and lockers are harder to find for it, along with just about anything else. I think you can get a spool for it, but you have to use a corvette part number.
You also could go with Rodeo/passport rear 44, but again weld on brackets, and the lug pattern is far different
Wagoneer 44's. Plenty beefy, but different lug pattern, gears, weld on brackets and some years where off center for the rear diff.
Rubi 44's direct swap, just make sure to get the locker wires' as well.
As for the stock 30 and 44 they can run 35's.
I ran 60's on my last TJ.. so not much help for the junkyard..mine where built with Visa.
|04-17-2009 01:13 PM|
from what ive read, my hp30/d44 combo will hold 35s with no problem.. im only running 33s right now.. but ill go bigger before too long
|04-17-2009 11:01 AM|
I have some info you might want but its not really got anything to do with axles more of just junkyard lifts and upgrades to your suspension and steering its alot of good info read through it if you want hope this help
results of the ZJ lift (on the tj) are in - JeepForum.com
Budget Junkyard Upgrades - JeepForum.com
|04-17-2009 07:57 AM|
There are a ton of junkyard swaps, and I believe that the WMS-WMS measurement on your TJ is 63", but most swaps are wider than that.
|04-17-2009 07:12 AM|
back to the topic...unfortunately, i don't have many answers. the dana 44 the came on the tj's are a very strong axle, imo. the tj dana 44's came w/ 4.10 gears, which will handle 35" tires. if you are planning on putting 35's on there you might want to regear the axles to a 4.56's or 4.88's. as far as upgrades that come out of other vehicles, i've seen threads about people taking the electric cooling fan out of a ford taurus and installing it in their jeeps. it is cheaper than buying a brand new flex-i-lite electric cooling fan.
|04-16-2009 09:21 PM|
|04-16-2009 09:16 PM|
|pyro||dont u love when they just ignore your questions? i dont know tho|
|04-14-2009 01:15 AM|
|Joshpfeffer||Will the Dana 44 out of older Cherokees and Wagoneers fit in a TJ? I've seen it written that they'll go straight into a YJ, but with the varying suspensions, will they work in a TJ as well? What would be required to do something like this?|
|04-13-2009 11:46 PM|
|Joshpfeffer||And will the stock D44s on TJs handle the load of 35" tires? Or no?|
|04-13-2009 11:41 PM|
Hey guys, I was just skimming a few articles here and started wondering about junkyard swaps you've all done and what all was/would be required. I know JP Magazine did an article a few months back similar to this, but as I recall, it wasn't exactly complete. So what I'm specifically interested in is axle/diff swaps in TJs. What axles people have mounted in their TJs to beef everything up, or to handle the pressures put on by larger tires. I've read a lot on Dana 44 swaps, seen a few 60 swaps, and then heard arguments for swapping in an 8.8 instead because of the affordability. Could we get a few arguments for each and WHY? What length would we be looking for on the diffs out of older 4WDs? And outside of just diff and axle swaps, has anyone been able to successfully upgrade with other parts that maybe aren't so obvious out of other cars? I think I've read a few articles on salvaging a few Cherokee parts to beef up the TJs? Please, lay on all the info you have here. Or link to somewhere that will maybe?