|07-23-2013 08:49 PM|
|Pitboss33||Probably would have made them easier to do, but I was to chick sh$@ to do the ones on there, so I used my buddy's old ones just in case it didn't turn out right.|
|07-23-2013 08:21 PM|
|MosesTJ||Ummm, butter? Why didn't you trim them while on the rig?|
|07-23-2013 06:57 PM|
Cut the stock fender flares with a dremel tool, and picked up some edge trim from oriellys to clean up the edges. Pretty easy to do.
|04-25-2013 05:30 AM|
|04-24-2013 08:26 PM|
Interesting... I never tried to take the grill off of my old TJ - but you can pop the JK's grill in about 3 minutes.
Don't get any ideas though.
|04-24-2013 05:56 PM|
I think you have to take radiator off and the sides
Not sure but either way i think keeping it on is the best way....took me an hour or less to do it
|04-24-2013 05:49 PM|
|kappaknight||Hah. Awesome. Is it hard to pull the grill off or something? I never tried.|
|04-24-2013 05:36 PM|
|jandaso||Btw i think that is the only use i found for the quatratec catalog|
|04-24-2013 05:34 PM|
So i did see a white tj with the grill painted balck and actually made me think about painting mine but thanks to pitboss's post i really jumped on that wagon and did mine yesterday
|04-23-2013 03:14 PM|
|r0ssman30||diggin' that bumper. Gives me an idea for mine.|
|04-23-2013 03:07 PM|
|jandaso||that looks nice... i was thinking about doing the same....painting it sating black|
|04-23-2013 02:28 PM|
|04-23-2013 12:36 PM|
|Pitboss33||Thanks, how did the bumper turn out on yours?|
|04-23-2013 05:37 AM|
|MosesTJ||I like the look.|
|04-22-2013 11:57 AM|
|Pitboss33||Painted the grille and added some kc lights to the bumper.|
|03-29-2013 07:26 PM|
|Trail-Hated4x4||Alright I'll see If I can find a place to tie them.|
|03-29-2013 07:06 PM|
|03-29-2013 06:21 PM|
|Trail-Hated4x4||Is it alright if I just sit them on top of the springs for now? Or will the fall? I tucked both of them up there and felt sturdy. Any thoughts?|
|03-29-2013 06:08 PM|
Check these instructions to see what I mean.
|03-29-2013 04:35 PM|
|03-29-2013 04:25 PM|
|kappaknight||I'd tie the sway bar links to the sway bar. I'm sure that's what you meant though.|
|03-29-2013 04:04 PM|
|Trail-Hated4x4||So just tie them to the axle?|
|03-29-2013 07:40 AM|
|Harleyrider1108||Zip tie them out of the way.|
|03-28-2013 09:56 PM|
|Trail-Hated4x4||Tie? Never heard of that. I just let the links hang.|
|03-28-2013 08:28 PM|
|kappaknight||Do you tie the sway bars when disconnected?|
|03-28-2013 05:55 PM|
Another cheap mod I did was the quick disconnect that everyone probably seen sometime or another on this forum.
Not the best. But it does it's purpose.
|03-28-2013 05:52 PM|
All together I spend about 60 bucks pair of steel pipe. Paint. A buddy and I welded them on the panel. Then primer and painted. Then just bolted back on my jeep.
O| | | | |O
Next project is building a rear bumper. Then later adding a swing out tire carrier.
|03-28-2013 05:18 PM|
|Trail-Hated4x4||Just added the expanded Metal on the bottom just to make it look different and for safety reason. Kids. Bent the pipe welded to the stock rock panel that comes with the rubicon. Then painted it.|
|03-27-2013 10:39 PM|
|kappaknight||Did the grate come with it? I wonder why... Unless you're panning for gold boulders, it'd just collect stuff.|
|03-27-2013 10:34 PM|
|cleveland99||Nice work man those look sick|
|This thread has more than 30 replies. Click here to review the whole thread.|