|10-07-2013 11:42 AM|
I have their xrc carrier and I am very happy with after all these years
|10-07-2013 11:16 AM|
Good and Bad
I have a 2013 JKU and put on a Smittybilt Tire Carrier. It supports up to 37" tires. I do some heavy 4x4ing and haven't had any problems with it. It bolted directly on with no problems. However, my friend had a 2013 JKU and bought a Smittybilt bumper. It looks nice but he had to cut out places to make it fit. So I talked with my local Jeep parts manager and he told me they use the tire carriers but don't recommend the bumpers due to most of them just not bolting on correctly without some modifications. Don't know about the rock sliders.
|10-07-2013 10:08 AM|
I have quite a few smitty products, front bumper and rear tire carrier, rock sliders, fenders, and tailgate pouches and I think a fire extinguisher too. I bought them because of the price, and I like the way most of their stuff looks
For me, the fitment of the bumpers was fine but the sliders just took a little drilling/grinding to get on. I would recommend to use some bedliner on all of their products and switch out the hardware whenever possible. I have been happy with everything I have gotten from them.
If your looking for a bumper that is going to be at moab every week for the next year, you might want something a little more stout.
|10-07-2013 08:35 AM|
I have XRC bumpers on my Jeep and so far they have held up just fine. They have been on for 7 months now. I have noticed some minimal chipping on the hinge of the rear tire carrier, but no big deal.
I chose these because the mod line allowed me to choose the options that I wanted on the front bumper. (Ie full width end caps, bull bar, etc.).
|10-07-2013 07:18 AM|
|302||I don't own smitty products, but their stuff is probably some of the most best looking stuff on the market. With that said, I was behind a guy wheelin one time and he had the smitty bumper/tire carrier combo. The thing rattled like crazy. That's the only downside I've seen personally on their products. A lot of guys in my local jeep club run their stuff and I have seen no negatives about breakages, etc.|
|10-07-2013 06:13 AM|
|TiltMaster||Its all the same. Smittybilt uses the same thickness of metal as everyone else. Metal is metal. They can just produce it for less.|
|08-02-2013 03:53 PM|
|Tweak||I purchased a bikini top a few weeks ago. apparently plastic hooks are designed to hold a 5x4 piece of cloth on the top of the jeep at 75mph. they snapped on the highway almost taking my head off so I replaced them with brackets that attach to the hardtop mounting points. now it is literally tearing itself apart every time I go faster than 55. terrible product.|
|08-02-2013 01:44 PM|
I run Smittybilt front and rear src bumpers along with rock rails. I do moderate wheeling - I've hit rocks, I've literally run down trees a good 8 inches in diameter that were in my way on trails and the most damage done has been a couple minor scrapes. In fact, I was sitting at a red light at night in the rain one night, and 70+ year old woman didn't have head lgihts on and rammed the back of my jeep going around 20-25 miles an hour. I had just enough time to get moving to about 5 mph before impact. Her car was totalled. Hood smashed up and front end absolutely crumpled (it was a toyota camry). My bumper? A slight scrape off the powder coating on one side.
Can't speak much for the rock rails - though I've heard from other members that they crumble compard to ACE and the likes. I just havn't hit anything hard on them so I wouldn't know.
Lastly - the only bad thing other than the rock rails I've ever heard is the whole shebang about not being an American product. Yes, it is nice to support the US economy and workers, but what it really comes down to is finding the product that gets the job done for you, for a price that doesn't break the bank.
OP - Please take my post as a definite reason to purchase these products. I even slapped one of their decals on the top of my windshield after that accident because I felt like I had gotten much more bang for my buck and that they deserved to have me be proud as a customer.
Done, ranting...just can't stand when people bash a product that they havn't had extensive experience with. Just because you have one bad experience with a single product of theirs doesn't mean they deserve to be called "Shittybilt".
|08-02-2013 01:02 PM|
|GalvestonSahara||Smitty is good bang for the buck stuff, and looks good too. Do what you want, I did! And I love the way my ride looks with smitty front bumper and sliders! Nothing like going down the beach on a sunday afternoon and having all the truck guys drop their jaws cause your ride looks bad ass but they are still saving up for what they think is the best stuff. Just put it on, and use it. If it falls off in two years big deal your out max 1000 bucks for front bumper and sliders. Then, go get a different set.|
|08-02-2013 12:08 PM|
I have smitty mod bumper , SRC rails , xrc8 , & soon to purchase the smitty atlas rear bumper!
Let me start by saying , " I beat the hell out if my jeep" no smitty gear has failed me yet. Then again I clean and take care of my stuff.
I repaint my rails when I drop them on rocks. I clean my bumpers and winch almost every week because I love my jeep.
Also like said earlier I would rather buy a pair of rails for $250-300 a then at $700-$800. Because either way they are going to get scratched & dented. I've put my entire jeep on the src's and was shocked that they held up as well as the did.
Smitty is a company that builds quality products at a affordable budget. Not everyone is blessed with the money tree in the back yard. It's all a matter of perspective and personal preference. But I say thank you to smitty for making good gear at a great price
|08-02-2013 11:54 AM|
|05-21-2013 11:03 AM|
My vote for "most accurate comment" of the day
|05-21-2013 10:18 AM|
300$ is more then I paid for my ace rails shipped to my door. I've owned a few smittybuilt products in the past that were fine but they weren't bumpers or sliders.
Some pics I have seen of the rails bending in on 4 doors was enough to make me not even consider them.
|05-21-2013 09:59 AM|
|05-21-2013 03:37 AM|
Ya winters are extreme out there from what I hear. Oh yes, the salt or mag-chloride or whatever it is can't be good and it is quite clear in that crystal clear photo that you pump out consistently well as usual! Very nice. Make me wish I did some winter wheeling- wait, there's plenty left one hour west. They just got snow at A Basin and I'm going skiing Thursday (normally they are open till July 4th)
I just have to say again how I love your bumper. It definitely looks beefy and is not comparable to a tube bumper to be fair.
The LoD did require some extra spacers to push it out far enough to clear the power plant and to allow the grill to come off. LoD said theirs cleared the proper plant on the house rig. No two Jeeps are ever the same I guess.
Oh and the trails may seem endless in Colorado compared to many places but they get closed so fast it makes your head spin- damn greenies. Can't we all just have a little piece of public land to responsibly recreate on? As for quality stuff and wheeling hard yes, it goes hand in hand. I just don't wheel the way I used but I still like to get the best quality I can afford and I'm willing to hold out and wait for it so that I can afford it; lift @ 20,000K, bumper&winch @ 35,000K etc
I do agree on the good points people have been making- it is a USA owned company (4wheel part bought them right?), and shipping industry here UPS, price, and so on
I should also add the front smitty bumper took some hits but the rear bent to $hit after one big drop and I couldn't even open the tailgate until I got some tools on it (Cherokee Sport) . In comparison the rear warn took such a hit that it bent a little on a huge drop on the rubicon trail that the downward force and sudden stop bent the rear-most body mount tab that is welded to the frame even though I had the Rokmen frame brace gusset things (LJ)
|05-20-2013 06:33 PM|
As for winters, NY/NJ salt the piss out of their roads, and this past winter, I spent a few weeks in Canada where my Jeep was literally coated in a layer of that spray crap (probably the same thing they use in Minnesota and Colorado.)
Dont know if you can tell, but you can see the coating of salt all over the thing....
When installing my Zeon winch, I had clearance issues that required me to modify a few things on the bumper. When I was cutting and drilling, the powdercoat in the surrounding area didn't even budge...something very rare, and I have owned many MANY high end parts over the years for my sports cars (German, Japanese, Australian and USA made.)
I have said it before...if I lived in Colorado where I had endless trails, and was constantly banging my jeep into rocks, I would probably look elsewhere. However, for most people, for a little style, the use of a step, and some protection for the occasional bang I think these products are great, particularly at this pricepoint.
I do see your point though, you owned a product that rusted through on you. You have every right/reason to not recommend it. Just like you though, I can only go by my experience and the smitty parts I own (very few, just the siderails and the A pillar light mounts) have had zero rust.
|05-20-2013 05:57 PM|
I have a Smittybilt XRC frt bumper with a Warn 9.5HS winch no problems with fitment and it has been almost 3 yrs now no rust. I was up last year on the Dusy Ershiem trail and didn't quite turn fast enough and bounced off of this boulder Yeah that turned me faster boulder dust all over the place....got out looked at the bumper and nothing but a little powder coat missing
I also have the SRC rear bumper and tire carrier....no issues.
A lot of people don't like Smittbilt because it is made in China.....but, isn't just about 90% of the things we have made somewhere else.
Once I rip off my nerf bars I will get their rock sliders and maybe the flat fenders too.
If you compare the rock slider material it is the same. I know because I have. Smittybilt comes powder coated, a lot of other manufacturs don't ,so you have to factor in those costs too.
I would love to have Poisen Spider or Metal cloak.....but who can afford them...not me
|05-20-2013 05:29 PM|
Glad your is holding up very well. It's a sweet looking bumper for sure. Minnesota winters killed all smitty built products I've owned (never again- no offense) and Colorado's mag-chloride is not far behind in harsh environments. I read a report about temperature changes being one of the most damaging aspects of weather related corrosion. People recreating in the mountains and returning to the foothills among the truckloads of mag-chloride being laid down is an extremely corrosive cocktail (below freezing temps in the Rockies and near 70 degree temps in Denver). I wash the whole jeep, including undercarriage, before I even pull in the garage.
LoD had past issues with rust creeping through and they now do a 5 step (2 stage zinc enriched powder coat) painting process. I would be very surprised to see smitty built outlasting LoD. Although maybe they get painted the exact same way for all I know. My experience is only with smitty builts tube bumpers, and they looked great until one day the rust consumes them seemingly overnight. Thank goodness I didn't try hooking up to it for a recovery when it was structurally compromised- that right there is why I won't own smitty built- my safety and the safety of others around me trumps a dollar saved. That's just my opinion, based on first hand experience.
|05-20-2013 02:22 PM|
|NFRs2000NYC||Mine are nearly two years old and have seen some of the worst salt imaginable. There is not a single ounce of rust on them. People also need to take into account the owner. Some Jeep guys don't wash their rigs for the entire winter season, letting the salt sit on their parts for months at a time. My rampage bumper also has ZERO rust.|
|05-20-2013 02:12 PM|
|woansleftpeg||At $300 for a pair of rocker rails, if they fall off my Jeep in a pile of rust in two years' time I won't feel cheated.|
|05-20-2013 12:54 PM|
Owned smittybuilt- they are not high quality, but some people have not compared them to anything else. They rusted to nothing even though I had a buddy with a wand spray the internals of their tube bumpers with a 3M protectant. The warn bumpers I replaced them with outlasted the Jeep (310,000 miles when I sold it).
Don't believe me? Then check out these time tested idioms/proverbs/sayings:
YOU GET WHAT YOU PAY FOR
PENNY WISE POUND FOOLISH
I realize OP already bought but this post is for the next reader to factor in to their decision
|05-20-2013 09:47 AM|
|woansleftpeg||Forgot about this thread. I bought the Smittybilt SRC Side Armor; I did have to dremel one of the holes a little bit, but the price and look was well worth the five minutes of work required to make them fit.|
|05-20-2013 09:40 AM|
|scottmacmoyle||Just installed the XRC front bumper with mid width extensions and a winch. Trimming required for the winch. The holes almost lined up. Took longer than I thought it would. Had to take it on and off a few times to get it lined up. Looks great. Just expected a little more for the money.|
|04-17-2013 12:45 PM|
|2five22||They used to be good stuff in the CJ era. The last time I looked at their stuff I noticed sloppy welds and poor finish issues. Include the complaints here of fitment and I won't be using their hardware.|
|04-17-2013 12:33 PM|
|rics1997||Seems like those that don't have them think they are poor quality. I have several of their products on my Jeep and all are great quality and had no fitment issues on my side rails. Very happy with mine. Smittybilt may get their products over seas but they are a US company. If you take apart a WARN winch, you will find a lot of their parts made in China and Mexico. Just assembled in US anymore.|
|04-17-2013 11:46 AM|
|BB1857||I have the Smittybilt SRC rockrails/steps on my 2 door and they fit perfect. 15 minutes of install time with no mods required. I am all about supporting the American economy when feasible but i too am on a budget with my Jeep and these were a great deal...bought them on Amazon with next day shipping $3.99...cant beat that! if i ever get the "hey you have Smittybilt stuff on your Jeep and its junk and Chinese" i will simply ask that person if they push their Jeep everywhere because it is most certainly running on foreign gas and oil not to mention the hundreds of parts that are sourced by Chrysler from foreign lands to build said Jeep!!|
|04-16-2013 10:47 PM|
|jrussblues||I like the american made stuff that they put on as factory options in the early 70's. The stuff now is outsourced so body parts dont always fit nicely but I ran an xrc8 winch for a while that performed quite well.|
|04-16-2013 10:40 PM|
|fireguy||I installed a Smittybuilt XRC front bumper and a Warn zeon 10k on the jku. I had to cut a small amount of metal from the top of the the bumper mount flange and a 1/8" off the flange at the inside top bolt so the winch would clear and the bumper would clear where everything meets at the frame bumper flange. I also trimmed about 1/8" with a grinder off the inside of the bumper top at each side where the winch set too close. I touched up all the cuts and grind areas with satin black paint and the front bumper and winch look great. I am very happy with the whole look and process. It took me about 7 hours to remove the stock and install the front bumper and winch. I also used a Smitty XRC with a tire carrier on the rear bumper and it went without any install, fit and finish issues and took me 3 1/2 hours to do. Been out on the trail and all works great tried the winch the front is solid and no issues with the tire carrier or rear bumper. I would have liked to use better quality accessories like Warn, Rockhard and others ect. but I had a budget to hold to as well.|
|04-01-2013 12:34 PM|
OK thanks. It's a JKU which may, possibly, one day do a little bit of light wheeling, but primarily for looks. You've convinced me; at the price, it really isn't the end of the world if the fit requires a little bit of persuasion.
I'll let you know how I get on!
|04-01-2013 12:22 PM|
|JGreer||I just got the SRC Side Armor. I had no fitment issues what-so-ever. They fit great and only took about 20 minutes to install. I live about 10 minutes from the 4wheelparts.com warehouse where they also have a shop. When I went in to purchase and pick-up the rails I asked about the fitment issues. He said it all depends on which factory they come from, either, China, Mexico, or... Canada I believe. Apparently one of the two has a bad mold for one of the mounting brackets. FWIW mine were from the factory in China. Again this is what he said so he could have been blowing smoke, but I don't know why he would because I asked him if I could return them if I had fitment issues. He said yes no problem so I didn't worry about it.|
|This thread has more than 30 replies. Click here to review the whole thread.|