|04-07-2013 02:31 PM|
|Cbailey||Thanks for the advice, it was the transmission mount, also the bolts on the tran plate were also loose. No more shaking!|
|04-03-2013 08:19 AM|
+1 for transmission mount.
I took off my skid plate and found that the old mount was absolutely destroyed. Now to be fair, I had this same wobble happen again ONCE with the new mount... so while the mount has stopped it from happening every 2-3 takeoffs, it has not truly solved the problem...
|04-03-2013 03:43 AM|
|ohiok5||maybe a warpped clutch plate/flywheel|
|04-02-2013 08:08 PM|
|Cbailey||I'm not sure of how old the clutch is, i just got it Feb. and now its having this problem. It only happens when I hit the gas hard or going uphill. If I ease into the gas then it is smooth.|
|03-31-2013 10:25 AM|
|1ofakind||My jeep does the same thing- how new is your clutch? I believe thats the cause of mine|
|03-30-2013 08:13 PM|
|03-30-2013 07:49 PM|
|larjeep||Check the u joints|
|03-30-2013 08:21 AM|
1999 Shaking like its gonna fall apart in 1st gear only
Ok, I have done some searching and cant find a good answer. My Jeep shakes terrible and when I go from a dead still stop in first gear, all the other gears are fine and shift smooth. It is much worse when I have to start on an incline also. Reverse is starting to do it also just not as bad. My first thing to check is the transmission motor mount, any other ideas?