|04-15-2013 08:53 AM|
|Justyndean||Where can u buy the rivet nuts at? And what did u use to counter sink the heads it to the plate ?|
|04-08-2013 08:55 PM|
I mounted my sliders thru the body with 5/16" counter sunk bolts. 14 per side. In places where I couldn't get on the backside of the body I inserted riv-nuts into the body.
|04-04-2013 07:11 PM|
|Justyndean||On the bottom|
|04-04-2013 07:08 PM|
|04-03-2013 08:57 AM|
|jerryj||Mine are on by bolting the bottoms with the factory bolts down there and have counter sunk allen heads on the sides to look nice.|
|04-01-2013 09:14 AM|
|Jersey Sahara||I did the same thing I ran 3 5/16" bolts through the side of the tub on each side then 2 bigger bolts through the bottom(don't remember the size.) also on the bottom I sleeves the bolts so they wouldn't crush the tub in the space between the slider and the tub|
|03-31-2013 05:17 PM|
I have built sliders for my tj. And there the style that caps over the rocker. I plan on bolting through the body. Just wondering how everyone is mounting there's.