|03-29-2014 07:39 PM|
|03-29-2014 07:37 PM|
My latest endeavor with paracord
A sort of harness for my subwoofers since they slide around so much on the slush mat in the cargo area. Unfortunately I didn't have enough purple leftover after grab handles like I thought I did so I have to buy more tomorrow but here's it like 2/3 finished
Even had some help from Cobra puppy
|03-27-2014 12:11 PM|
But hey have a leash if I get another one
|03-27-2014 11:27 AM|
I'm going to be making straps to hold my subs down (they came with it)
They keep rolling around and it's annoying as hell and I figured I needed to incorporate the black and purple thing all the way through my jeep lol
|03-23-2014 04:18 PM|
|4x4mickey||OK the leash is posted in my jeep profile can't get it to load them in to the thread but shows the idea|
|03-23-2014 03:13 PM|
|4x4mickey||well i have it made, now just need to get this thing to allow me to post a photo of it|
|03-22-2014 03:34 PM|
|03-22-2014 02:47 PM|
Post pics when you're done
|03-22-2014 02:38 PM|
|4x4mickey||Im working on a dog leash right now that will wrap the roll bar and then hook to her but be short enough she won't hit the ground in the event she tries to jump it will just put her back in the seat. and be strong enough i can put her on it as a primary lead when out of the jeep in the trail also.|
|03-22-2014 02:36 PM|
|03-22-2014 12:59 PM|
My little adjustment to the measurements listed in the first post cause I guess the roll bars on my 2010 are thicker than the OP's
Roll bar core: 43"
Roll bar wrap: 51.5" of each color (103" total) [although this baaaarely made it to the end so you could probably add an inch or two. I did 2.4" per inch of core 2.5 would probably be a better amount
Also, when I did my first one I was a little unclear of how to do the wrapping around where the core connects to the part that goes around the roll bar. I ended up figuring it out so here is pictures of the front and back of how I did mine.
I put my colored strand through where I melted the two ends of the core wrap together so that it was kiddy corner on the other side of the core and ran the black cord over where I just tucked my purple and across the back so it's like an X and then continued wrapping. Just made sure it was tight against the core after doing a couple knots (or whatever it'd be called)
Hope it helps someone. I'm really loving this process and I can't wait to make more stuff lol
|03-22-2014 12:53 PM|
|03-22-2014 10:46 AM|
I make grab handles for a little side money and I just installed my first pair on a JK this morning. Turned out really good!
|03-22-2014 09:40 AM|
Made my first one and the handles that go around the bar were a bit to short (didn't measure I was too excited to get started so I used the measurements on here) so I had to add some length to them.. Approx 4 inches of actual handle
But I finally got it in
Now onto the others
|03-20-2014 03:14 PM|
|03-20-2014 01:52 PM|
Uh oh I think you guys just got me into a whole mess of future fun para cord goodies
This is fun. I'm in the middle of my first handle now
|03-19-2014 07:33 PM|
|4x4mickey||Yeah it sounds crazy but you use a lot more then ya think to weave the parts. Also U Tube has videos on how to do it also to give you a idea|
|03-19-2014 07:29 PM|
Are you planning on weaving it or just wrapping it around?
If just wrapping it then it is just to length you want with a clasp of some kind.
If your weaving it then it is 1' of food for every inch of weave .
Wrap some food around the bar and messure it. Then use that many inches in feet.
So if it is 6" worth of cord to wrap the bar you will need 6' of cord to weave it to make it go around your bar.
|03-19-2014 03:27 PM|
I've never done anything like this so sorry if I sound dumb it just seems like a lot lol
|03-19-2014 02:50 PM|
If you measure your roll bar or whatever you want to make it for take that number in feet of para cord.
EX. 9" would be 9' of cordage. I normally will add a extra foot if I have it just in case
Also if you weave it real tight you will use less then if it is lose
|03-19-2014 02:46 PM|
|MustangGrl||Are the measurements the same for the part that goes around the roll bar if you have the roll bar padding on it? Or should I add some length to it?|
|03-06-2014 05:54 AM|
|03-06-2014 05:49 AM|
|03-05-2014 10:08 PM|
|03-04-2014 03:26 PM|
|03-04-2014 03:23 PM|
Made these todsy
|03-03-2014 08:46 PM|
|TheJeepKing||I have recently started making grab handles and door limiter straps. I started out just making my own but other peol me seen it so i started making them and having a little job side. I use the king cobra weave and have Velcro that goes halfway around the Rollbar so it makes it a tight fit with no movement. I am very pleased and amazed at how strong these are!|
|03-03-2014 03:27 PM|
|4x4mickey||Lol! Yeah or have a wooden bobber|
|03-03-2014 10:57 AM|
Although, once you unravel your paracord to save whoever's life, your now halfway to a game of celebratory Beer Pong.
|03-03-2014 12:32 AM|
|cyhenriks||Thank you for this post!! You made this so easy to understand. I love my new handles!|
|This thread has more than 30 replies. Click here to review the whole thread.|