|09-25-2014 12:59 AM|
If you need to deco you Jeep, maybe you can have a look at the MyLED.com site. Check out here: Search - led light bar find LED light bars and choose what you love.
If you have any question,don't hesitate to let us know by contact: firstname.lastname@example.org
|03-31-2014 10:50 PM|
|03-31-2014 09:48 PM|
|RSEO10||for the hvac do you get the 3mm, 4mm or the 5mm set?|
|07-11-2013 01:21 PM|
|07-11-2013 12:55 PM|
|07-11-2013 12:42 PM|
|07-11-2013 09:43 AM|
Mine show up purple enough to see them.
|07-10-2013 08:05 PM|
Are you positive that all of the LEDs are lit? What brand/model of LED did you purchase? There are a couple of other threads around here somewhere where people felt as though they were not bright enough.
Silly question, but I'm sure you've got the dash brightness turned up? Is that even possible on the 2000?
|07-10-2013 07:01 PM|
|JulioMedina||I have a 2000 TJ that I did the gauge cluster with red LEDs but its still not all red there are some dim spots and dead areas unlike the pics some of you guys have posted. Any idea what I could have done wrong?|
|04-18-2013 10:16 PM|
|nicodemus||And here's a pic of it in the dark!|
|04-18-2013 06:52 PM|
|nicodemus||I received mine today and got them installed! Going to wait till dark to see how it looks through the gauge needles. I may still mod them but pretty happy with it so far!|
|04-17-2013 09:01 PM|
|zanewolfgang||I ordered mine on Sunday and already received them! Superbrights is the way to go! Im usually pretty leary when I hear something is easy especially tearing the dash apart but this really was easy. Took about 1/2 hour for gauges and HVAC. Just make sure you have needle nose pliers handy.|
|04-17-2013 09:59 AM|
(on the clear needle near the center, there was a small section of orange I could not get to to remove the orange. I painted the top of that black. You'll see and deal with it however works)
|04-17-2013 09:45 AM|
|mikemounlio||Note my needle lights up in white due to the leds in that area were changed to white.|
|04-17-2013 09:43 AM|
I just looked at the needles of my 03. They have a sticker/pait on the back side. You need to scrap that off. Also they have the same coating on the top but just in the center. Once this coating is off the light in pass through the clear needle lighting it up.
this is my cbr dash. the needle was once orangeish red
2008 CBR1000RR custom backlighting - YouTube
|04-17-2013 09:37 AM|
If you want blue lights in the dash but still want to see the needles then just scrap off the red sticker from the needle.
I have not done this on the jeep yet. I did it to my cbr1000rr dash. I 1st did the mod then put it all back together. Once it got dark my needle was almost not seen. I had to take it all back apart and troubleshoot. In the end i took a sharp knife and scraped off all the color of the needle. In the end the needle was clear.
Now it is blue like the rest of the dash.
|04-17-2013 07:34 AM|
|rgroesbeck1||So I have been thinking about this -- dangerous thing, thinking. The cover for the gauges is very easy to open, just a couple tabs. Wouldn't it be just as easy to carefully paint the needles white using an artist brush? Maybe a flat white paint? Anyone tried that with good results?|
|04-17-2013 05:39 AM|
Note obviously running the engine will heat the water so you be the judge where the temp should be.
|04-16-2013 10:34 PM|
But the new one from newegg works great, and i use the tourque android app.
FIREHOUND, looks great! I decided against doing the hvac, but your pic has changed my mind.
|04-16-2013 10:30 PM|
|nicodemus||Thanks for the advice! I'm feeling a bit more confident, just thumbed through the billion page led change thread lol... I'm pretty excited too, going to get my blue CD player, blue dash lights, probably stick with white dome lights, and blue floor lights. Gonna be awesomesauce!|
|04-16-2013 10:29 PM|
My fav mod so far
|04-16-2013 10:18 PM|
|04-16-2013 10:17 PM|
|Virus692||If you have android torque app would work well with a obd2 bluetooth plug($20 buck on ebay elm327) you can pull the data right from the on board computer|
|04-16-2013 06:14 PM|
|nicodemus||Oh wow, I should have thought of that. Well that makes me feel a bit better. But anyone know if the gauge reset will fix the needle issue without having to stand on one foot and cross my eyes to get them put back on?|
|04-16-2013 06:12 PM|
|Bigchris66||You can get an app to see your mph|
|04-16-2013 05:39 PM|
I'm thinking about taking my gauge needles off my 04 tj and was wondering if performing a reset by holding the trip reset while turning the key would be enough to reset the needles to zero?
I want to go from red to white needles. I don't have a GPS to gauge my mph so I don't want to get stuck with messed up needles. Lol
Sorry if this is the wrong place for this just thought it was relevant to the conversation.
|04-13-2013 11:45 AM|
Thanks, will have to order this week.
|04-13-2013 06:38 AM|
|04-13-2013 12:35 AM|
I went with green looks awesome
|04-12-2013 11:33 PM|
|This thread has more than 30 replies. Click here to review the whole thread.|