|11-02-2014 03:45 AM|
|BreckenridgeYJ||What new suspension Set up is in store for the winter? I'm excited to hear what you decide!|
|10-26-2014 11:48 AM|
|NC Bear||I have a Bulldog safe like yours but I did not get the mount like that. Hmm, need to do some looking I like that. very clean!|
|10-23-2014 09:50 PM|
|Joshb||I have the same one...Just havent put into my jeep yet. The G19 fits perfect in there|
|10-23-2014 09:17 PM|
Put in a lock box today. Found it at Big R, then ordered 2 off Amazon for $27 each. I put them in today! Had to remove the front seat to get the drill in there.
This is the mounting bracket, bolts to floor etc.
The lock box locks closed then slides in the enclosed mounting bracket. Then you turn the lock open and lock the safe to the bracket.
Sticks out a bit but not worried about it.
Gun fits perfectly, you can also see the locking cable that is anchored underneath one of the bolts of the mounting bracket to the safe itself. So even if you did pry it out of the mounting bracket she still can't walk away with the safe.
When the doors are off I can simply rock the seat forward and you can't tell the safe is there at all.
|10-23-2014 09:08 PM|
|Sinister6||Let me know what you think?|
|10-10-2014 09:48 PM|
Just wanted to say Thanks for the info on the centramatic wheel balancers.
I just scored a used set on eBay for $40, ordering new rubber next week.
I didnt realise these things were so big !!!
|10-02-2014 11:51 AM|
|09-28-2014 11:11 AM|
Replaced the front speaker yesterday. Huge difference!
They bolted right in Except the mounting plate is different.
The Jeep has speakers mounted in these pods, if you look at the pictures of the speakers on the box in the mounting tabs on the pod you can see their different.
I found these cutting drillbits at Harbor freight, they make quick work of the plastic in the pod. I put the speakers in the pod pre-drilled a hole & used the original screws to secure the speaker in the pod. The rest is pretty simple.
NOTE: when putting speakers in make sure you have them in phase. Meaning make sure you have the positive & Negative connected properly. To determine which lead on your speaker is which... Take some leads and hook them to a AA battery if you're positive and negative's are set up properly, The speaker should lift, improperly and the speaker will drop down.
|09-28-2014 10:21 AM|
|09-28-2014 10:02 AM|
|tabber02||kinda quiet in here|
|09-22-2014 10:30 AM|
|09-22-2014 08:55 AM|
|09-19-2014 08:54 PM|
|09-19-2014 10:12 AM|
|goblin00||Love that rear stinger! Where and how much was it if you dont mind me asking??|
|09-17-2014 11:46 AM|
|09-17-2014 11:00 AM|
|09-17-2014 10:56 AM|
|09-16-2014 09:12 PM|
|09-16-2014 08:41 PM|
|09-16-2014 04:30 PM|
|09-16-2014 01:16 PM|
PM if interested one is a KP and one is a BJ both Ford HP
|09-16-2014 10:59 AM|
|09-16-2014 10:14 AM|
|WZJ||Jealous of your wheelin spots out west!|
|09-16-2014 10:02 AM|
|09-15-2014 09:24 PM|
|09-15-2014 10:04 AM|
|09-15-2014 12:42 AM|
|Skywgn1||I noticed that you have had the louvers on for a while. Any input regarding pros/cons?|
|09-14-2014 03:03 PM|
http://www.youtube.com/watch?v=lkszZch69kk - Video Tube for YouTube - iPhone/iPad
Why build it if you don't use it!
|09-13-2014 09:32 AM|
|09-13-2014 01:03 AM|
|EricIndecisive||Cool vids and badass rig man. Love how you ran over the camera in the last one lol. Crazy how technical it is too.. it looks like one wrong move and you're flipped|
|This thread has more than 30 replies. Click here to review the whole thread.|