|05-22-2013 06:31 AM|
|allison.kylie||Yeah... But im gunna tell u now its not 4-10,000 job. If you look around an find the very few people that have them an did them right an the jeep looks like $100000 not a thrown together mess theyll tell u your way off with the price. I mean the one guy just said the motor was $2500 to buy a really nice jeep yet tooo depending on the year pretty much nothing under $8000 an then the conversion stuff which i found were between $4500-$6500 an then you have to make the computer match the motor which is a lot an you need to get the title to match the jeep an the motor|
|05-21-2013 10:30 PM|
|MI JeepSkate||i found a 2012 5.7 engine and trans with 10,000 miles out of a ram 4x4 for $2500 and the guy will deliver for free. however, with that purchase and the AEV kit id be flat broke. i hope i get a promotion soon!|
|05-21-2013 09:49 PM|
|05-21-2013 06:43 PM|
I LOVE my 6.4L HEMI in my JKU Rubicon. And it is neck snapping fast...
I also have had a 5.7L and a 6.1L JKU both were awesome too. The 3.8 is way inadequate for a JK Wrangler, the new 3.6 is MUCH better and with a supercharger on the 3.6, I bet it would be AWESOME too!
I vote got Going For It!!!
|05-21-2013 03:43 PM|
|badboydeafjeep||If u only willing throw alot $$$ around jeep no matter what years is it it ur $$ to spend it everyone different idea of how to build their jeep,,|
|05-18-2013 11:37 AM|
There are lots of different types of trails and in lots of parts of the country even a tube buggy with sticky tires have to spin them to make it up things. To me if someone only wheeled in spots where the tires never spun they would be limiting them selfs on where they can wheel.
But at the same time if you only wheeled in places with great traction this is a great mindset.
|05-18-2013 11:17 AM|
|05-10-2013 10:20 PM|
|badboydeafjeep||Worry about how spend $$$ ,,, how that lot less doing all change all u need is golen engine long block it got 350 hp in it while u add new parts on it might be add more hp out of it,,,,|
|05-10-2013 10:33 AM|
My JKUR is probably pushing 5,000 lbs. with the bumpers, skids, wheels & tires. The 5.7 Hemi is the same one used in a Ram pick-up. It's not a neck-snapper by any means, but it will get you down the road. I drive reasonably sane on the road and like to fashion my off-road driving style referred to by the late Granville King (look him up if you don't know who that is) as 'driving elegant'. Spinning tires means lost traction. Speed breaks things. Do I need a V-8 Hemi in low range? No way. But, it drives so well and has so much more torque that the 3.8 slug that it drives far better slow and controlled in the rocks.
As for warranty issues other than drivetrain, my dealer has replaced the sway bar disconnect three times now. At $1100 - $1500 a pop, that's pretty significant. I was assured that if anything went south with the transfer case or front/rear ends that there shouldn't be any problem covering those under warranty, either.
|05-10-2013 07:22 AM|
|allison.kylie||Just to let you know too, the person on the first page said it would be about $10,000. The guy that built mine and others that I have seen that you could trust to drive them from PA to CA and back 10 times costed them around $40,000 if not more. I mean just think about it to get a nice jeep with low miles your gunna pay atleast $10,000 (depending on the year) Then you need to find just a hemi motor or the whole car/truck with low miles. Thats gunna be, I am really not sure out of the junk yard $2,000???? or more, not sure. Then all you have is the jeep and the motor. You still need to get all the wiring and conversion stuff. And then you need to make sure the computer matches with the motor. It is really confusing when the guy told me about it, I know I would never have enough patients to do it. I am just letting you know, not trying to start any fights or anything|
|05-09-2013 11:55 PM|
|badboydeafjeep||Cool i just look up crossfire engine srt-6 they do have it , hp is 330/ tq310 in it intersing ,,,,,,,,,|
|05-09-2013 11:33 PM|
|05-09-2013 10:39 PM|
|badboydeafjeep||Or would be cool if they make I-6 SRT engine ?? Would that be awesome for it ??? Can i dream it would be happened !!!|
|05-09-2013 09:15 PM|
hey just to let you know i have one for sale. it gets about 15-20 mpg no lie! it is actually really good! i love it! attached is the link to my ad:
|05-09-2013 06:18 PM|
That was actually considered the High Powered engine when it came out!
|05-09-2013 04:32 PM|
I usually laugh at customers who ask about hemis and tell them you get either the wrangler OR the hemi. For what and how the wrangler is designed, a hemi just doesn't make sense. You wanna go that big buy a truck or build a buggy; a wrangler isn't for you. The wrangler has evolved into the JK for a reason and as soon as they try and start building them with hemi chrysler will get more crap about selling out over lost wheeling performance to satisfy the "popular" market like the 2 wd wranglers in 07 and the 3.8.
Message to the original poster: love what's on your lot. Don't discount factory performance or you'll never make it in the industry. Buy a wrangler and leave it stock. Find a local group and learn how to wheel and you'll be surprised at what a stock wrangler can do.
|05-08-2013 07:15 PM|
|05-08-2013 07:10 PM|
|05-08-2013 07:03 PM|
|05-08-2013 07:02 PM|
|positrak||From what I have gathered, the actual sole reason they don't offer it from the factory is safety regulations i.e. crash testing. These things barely fit inside the engine bay in fact previous install kits required hammering in the firewall to make them fit. I don't know the intricacies of the regulations whether you need to have x inches clearance around an engine in a vehicle in order to get certified, but crow-barring in a massive engine into a tiny engine bay and not being "approved" makes sense to me.|
|05-08-2013 05:52 PM|
|ohioviper||For a DD the Diesel would be superior.More torque to get you moving and better fuel economy.For a trail rig not so much. Deep mud and rocks require quick rpms to get up on top or over.A Hemi will turn the tires quicker and faster with a wider rpm range not needing a gear change.Where a Diesel is slower to come up on rpms and limited max rpms needing a gear change loosing momentum.|
|05-08-2013 04:58 PM|
|HK_Runner||Well, the motor is not exactly one to go into the history books but if new heads are also frying, I am pretty perplexed by Chrysler's inability (or unwillingness?) to fix this issue once and for all. Maybe they should just use someone else's motor.|
|05-08-2013 04:47 PM|
penstar motor crap
I don't know if any of you are having the problems I am, but two head replacements later, I think Jeep wranglers have a major problem in the "new" penstar motor! So I think they would opt to switch out the motor for you. In my case, when the head goes out a third time, I get to claim lemon law, I just hope they don't try to replace it with another Penstar motor. just saying
|05-08-2013 01:27 PM|
|utjdh04||I have the 5.7L in my '08 Unlimited Rubicon. Cost me over $20K, but I had the work done by Screamin' Lizard Customs in Bedford. It's a crate motor with a 54RFE trans, and I couldn't be more pleased with how it runs. I didn't want to go with a bigger motor. Don't need it. The 5.7 has plenty of power on and off road. It drives just like the Jeep should. The 3.8 was a slug after I put 35s on it (even with 4.88s), and front/rear AEV bumpers, skidplates, etc. It was OK in 4-Lo on the trail, but on the road, it was downright dangerous. Now, it's a true pleasure to drive. Mileage? Horrible, but about what I got with the 3.8 after lifting it and adding all that weight - 11-13 mpg. Economically advantageous? No way. But, it's so dang much fun to drive with that V-8 rumbling under me, it was worth every penny. I've had it over a year now, and the dealer has covered warranty issues not directly related to the motor/trans. If you've got the opportunity to do such a swap, I'd say you'll not regret it. I haven't.|
|05-07-2013 09:52 PM|
|badboydeafjeep||Or u can go to engine company called (( golen engine )) they have long block I-6 with 350 hp in it price go for $4,999 for it .|
|05-07-2013 09:47 PM|
|badboydeafjeep||Diesel ?? Sorry!!! Not for me !!!!|
|05-07-2013 07:11 PM|
I'm with the other guys saying a Diesel is the superior option for a Jeep. They make as much torque as the 5.7 with half the displacement, half the RPM. Perfect for offroad. The better MPG is a nice perk.
The only downside is cost... The Diesel in the new Grand Cherokee ends up being about a $4500 option. The hurts compared to the Pentastar price, but still sounds like a bargain compared to the cost and aggravation of a V8 swap. Hope they do it in the next couple years!
|05-07-2013 04:09 PM|
|HK_Runner||I'd agree, if that diesel engine was trouble-free and not a nightmare to maintain. Then again, I am not sure how reliable Hemis are. I don't buy Chrysler vehicles (except this Jeep...my first) so I have no personal experience. However, several buddies do and their non-Wrangler Jeeps are in the shop quite often. Not sure why they end up in the shop, but I'll start asking.|
|05-07-2013 03:59 PM|
I'm with Sgt93 -
If you want me to pay a premium for a better engine in my Wrangler it's diesel or nothing. Why on earth would I want to cope with the cost and weight of a large Hemi V-8 when a smaller displacement diesel will stomp that gas engine in any performance category that matters to me.
|05-06-2013 10:23 PM|
|This thread has more than 30 replies. Click here to review the whole thread.|