|04-25-2013 12:28 PM|
|Silverton34||Ive always used 2.5" lifts on all three of my JKs and the Teraflex or equal rear axle mounting bracket. My JKs have been pretty much offroad machines and I have never been able to destroy a stock rear track bar. If I remember correctly they are a forged steel unit.|
|04-25-2013 12:20 PM|
|04-25-2013 12:16 PM|
|kjeeper10||Rofl.. They really do a great job on some of the roads here in CT. Stiffer ride but dampen well.|
|04-25-2013 12:15 PM|
|04-25-2013 12:14 PM|
|04-25-2013 12:08 PM|
|04-25-2013 12:02 PM|
|04-25-2013 11:42 AM|
|04-25-2013 11:22 AM|
|kjeeper10||RK track bar fits the TF bracket. I can take pics if anybody wants|
|04-17-2013 09:41 PM|
|04-17-2013 09:58 AM|
|kjeeper10||Here is a pic I have|
|04-17-2013 09:52 AM|
The drop bracket will do nothing for geometry. TF Only offers the drop bracket in their BB's now.
I will check it out for you later.
Edit ... Make sure you get the bracket with multiple locations. I believe there is a 1 - 2 and 3 hole.
|04-17-2013 09:50 AM|
The whole goal was to eliminate the drop bracket on the frame side of the track bar and recenter the rear diff after the 2.5" tera flex BB.
Can I achieve that with the stock TB and teraflex bracket?
|04-17-2013 09:07 AM|
We carry the Teraflex Bracket as well, and looking at the Install Instructions, it seems like you could have it on in about a half hour.
Let me know if you have any other questions. I'll be happy to help!
|04-17-2013 04:35 AM|
|kjeeper10||Not sure. I can take a look for you. Grab a measurement or something ?|
|04-17-2013 03:28 AM|
Damn I'm lost on this one...
|04-17-2013 01:03 AM|
He's correct. For centering duties, you may not need it.
For strength and a better performing TB. Maybe.
I have a brand new RK track bar that's sitting in my garage. The axle is pretty close to center given the multiple adjustment holes.
|04-17-2013 12:16 AM|
|SilverSport||With the TF bracket you won't need the RK TB.|
|04-16-2013 04:56 PM|
|mhanksii||Will the terra flex bracket work with the rock krawler track bar?|
|04-16-2013 12:08 PM|
The Rk mount requires welding whereas the TF mount does not. I don't know if its required to run the RK TB. I have a RK rear but its not installed.
A rear bracket raises roll center.
|04-16-2013 12:01 PM|
|Garyk||Instead of waiting 3-6 weeks, make your own....cut the stock one off, duplicate it with 1/4" plate steel but make it big enough to accommodate the new trac bar..|
|04-16-2013 11:57 AM|
Have you considered the Teraflex bracket that bolts to the axle and also strengthens the axle mount?
Teraflex 1954777 - TeraFlex Rear Trackbar Bracket for 07-13 Jeep® Wrangler & Wrangler Unlimited JK with 2-6" Lift - Quadratec
|04-16-2013 11:32 AM|
|04-16-2013 10:46 AM|
|04-16-2013 10:31 AM|
Also it does strengthen the track bar mounting point because it's made form 1/4" steel rather than the flimsy factory mount.
Let me know if you have any other questions. I hope this helps!
|04-16-2013 09:20 AM|
rear track bar help
Ok, so I bought a 2.5" teraflex BB that came with a rear track bar drop bracket that attached to the frame end of the track bar. That bracket didn't live through my offroad terror and now needs to be replaced. I bought Rock Krawler bomb proof rear track bar but failed to see that it requires the Rock Krawler rear track bar bracket.
Does this bracket make it "bomb proof" and reinforce the axel end of the track bar or is it completely neccesary for installtion?
JK Bomb Proof Rear Track Bar and Bracket#