|07-05-2011 03:04 PM|
|Probo||I mean 33|
|07-05-2011 03:04 PM|
|07-01-2011 10:25 AM|
|newjeepowner22||almost for got. this is my 1st ever jeep. sahara wrangler unlimited jk 4 door. so far I love this jeep over any auto i have ever owned|
|07-01-2011 10:23 AM|
|newjeepowner22||I am also wondering. I have 33" X 17 rims nitto dura graplers a/t. I want to buy the same tire for the spare. do you think it would be a problem ?|
|06-29-2011 01:11 AM|
|Probo||I don't know where fights came from maybe I mean fits.... I phones and the texting mess me up|
|06-28-2011 08:05 AM|
|06-10-2011 12:47 AM|
|06-09-2011 10:18 AM|
|HessTruck||PROBO...What size rim do you have on in that picture? And my stock 2008 Jeep Unlimited Sahara is getting 275/70/18 BF Goodrich A/T KO as we speak, I am just double checking that they will fit and the spare on the back will fit. Whats the conversion again? Thanks to anyone with info.|
|06-01-2011 11:32 PM|
|Wandell||With normal care you can easily get 60,000 miles out of BFG AT KO's.|
|06-01-2011 04:54 PM|
|06-01-2011 03:24 PM|
|Wandell||Keep in mind that the actual height and width for any given tire size will vary from one manufacturer to another. If you want the EXACT height and width, it can be found on the tire manufactuer's website.|
|06-01-2011 01:44 PM|
|Probo||I put 33 by 12.5 on mine no spacers.... Rubs alittle when completely cranked but atleast it looks rad|
|06-01-2011 01:23 PM|
Do you have some pics? I'm thinking about upgrading my tires with 275/70/18 with stock rims no lift and spacers.
|01-28-2010 10:11 PM|
|mfranic||The BFGs A/T KO 275/70/18 are half an inch taller and half an inch wider than the dueler revo 2 of the same size 275/70/18. The revos look like a stock tire - I tried them and had them removed.|
|01-27-2010 11:28 AM|
Like my Sahara's stock 32" tires? Not even 31" in reality.
My old 32.6" Generals were under 32". My 33.1" MTR/K's are actually 32.3", etc.
|01-27-2010 11:07 AM|
So a 275x70 is roughly 10.82" wide with a 7.57" sidewall, over all diameter is 33.15". 255x70 is 10.03"wide with 7.02 sidewall height, overall diameter is 32.05".
These are unmounted measurements, and like I said before different mfgs vary in how true to measurements they run. So, if you changed mfg, and type tire, your differences will vary.
|01-27-2010 10:25 AM|
275 = width in MM, 70 = 7.0" wall height 18's is wheel size- 18 + 7 + 7 = ~33 inch tires, but some of the wall is inside the wheel which means it is probably a 32/31.5 tire. That is my understanding?
|01-27-2010 09:18 AM|
Whether it's a 2dr/4dr, each mfg states what the DIAMETER of each tire is, but
When you mount it on your vehicle, depending on the WEIGHT front/back, the tire will be up to 5% smaller in dia-(air pressure/width-etc)
On the 4dr, when you've installed a larger size and put it on the STOCK spare tire mount---
You SHOULD get extended bumpstops (Daystar), these aren't just for kicks they will keep your hinge welds from fracturing
I use them and also a small dense foam cushion, on the rear bumper,(under tire)
If/when you go to an alternate rear bumper/tirecarrier--that solves the hinge trouble
I've used Shrockworks on several vehicles prior to the jeep--Outstanding
Watch your P's and Q's
|01-27-2010 08:55 AM|
Offset is the space between the centerline of the wheel and the hub mounting surface. Backspacing is the measurement from the hub mounting surface and the inner tire mounting surface. Most Jeepers are only seriously concerned with BS in my experience. On cars with big brakes you have to watch offset as well, to clear the calipers. I can find a diagram, if you need it.
255/70/18's should be about an inch shorter than 275/70/18's, but there are variances depending on the tire and mfg.
|01-27-2010 07:01 AM|
I currently run 255/75 17 and would love to find a pair of 275/85 17 but the tire makers tend to 1) change tire nomenclature (32 x 12.5 16 - ex) and 2) charge alot more for the larger wheel. I kinda of wish I would have purchase the stock wrangler wheels.
I think a 32 inch tire would be fine but I don't flex like some of these guys, but I do have problems understanding offsets. Can someone clarify?
ps. not trying to hijack!
|01-27-2010 06:03 AM|
Sahara 4dr 2010:
I just installed BFG T/A KO 275/70 18. Side by side with the stock tires (Dueler 255/70 18) they were 1.5" taller and about 1" wider. More than the specs.
Much stumpier look.
No spacers (wheel or springs). No rubbing at all. Spare fits on the carrier with just 1mm to spare away from the bumper and 1mm to spare from the stop light. The front has 5mm room at full turn in each direction.
|05-05-2009 02:21 PM|
32.8" I posted pics elsewhere.
By the way, in a TIGHT turn to the right, they rub ever so slightly, but you shouldn't be turning that tightly anyways- Mark W.
|05-05-2009 12:57 AM|
|HuGo_JK||i thouhht that tire size is 33 or is it 32?|
|05-02-2009 10:16 AM|
|thaduke2003||285/70/17's don't rub on-road so far with no lift or spacers. Off-road, I believe they'd rub, however. Spacers and lift to follow shortly Mark W.|
|05-01-2009 02:28 PM|
|JKSurfbum||Thanks for the input. You guys confirmed what I thought.|
|05-01-2009 10:12 AM|
|ocbasbalburg||Spacers (or wheels with different BS) will alleviate rub while turning and on the brake lines. However rub on the fenders will need to be addressed with a lift when you have tires greater than 32". 33" with correct spacers will not have any rubbing unless at full flex. 33" on stock suspension just looks funny too (2-2.5 lift is the way to go IMO).|
|05-01-2009 09:15 AM|
|Hilldweller||275/70-18 --- only problem will be that the speedo/odo will be off and stock gearing will seem sluggish. That tire size would go very well with 4.56 gears.|
|05-01-2009 07:10 AM|
|thaduke2003||I'm in a similar boat with 17" wheels, though. Will spacers alleviate the rubbing issue (is it on hard parts), or is it the fenders (which can be shaved)? Thanks- Mark W.|
|04-30-2009 10:47 PM|
|ocbasbalburg||Without rubbing AT ALL (turns, flexing) 32's. A lot of people run 33's and deal with the very few times that there will be some rub.|
|04-30-2009 09:51 PM|
|BeerMonkeY||depends if you want to cut fenders or not, id bet if you dont go wheeling you can fit 33's|
|This thread has more than 30 replies. Click here to review the whole thread.|