|09-05-2014 02:23 PM|
|ferninAZ||I have the "jump" seat (behind the driver) out all the time. I put my tools in that space. I have also had both pieces out, my biggest problem with that is my dog does not have somewhere to sit. It is a little bit of a weight saving and if you are into saving weight, removing the seats is one good way to do it.|
|09-05-2014 10:29 AM|
Hey,, I use XP and have OTA TV, but I'm not hateful or stubborn
"Also, my little dogs can jump in with the seats removed They couldn't make it up to the top of the folded down seats."
You need taller dogs
|09-05-2014 10:04 AM|
|09-05-2014 02:00 AM|
FWIW, here's why I want to remove my JKUR's rear seats:
I'm 6' tall and I keep my driver's seat all the way back. When I fold the rear seat in my JKUR flat, the headrest mashes against the back of the driver's seat (and passenger seat if it's all the way back too). I don't want to deform the rear seat headrests or the front seatback pockets so that's one reason I want to remove the rear seats.
I also want to make a flat platform in the back of the JKUR so I can sleep back there.
I want to make storage compartments where the rear seat goes.
And I want to delete 80+ lbs. of steel, foam and "pleather."
It would be AWESOME to be able to remove the rear seats in 15 minutes and re-install them in 15 minutes.
|04-24-2013 09:41 PM|
|04-24-2013 09:11 PM|
You guys are right actually, you don't gain much more cargo space. The seats fold completely flat. My complaint is because I never have passengers so it doesnt make sense to haul around 70lbs+ of something I'll never use. Also its leather and will be better off wrapped up in the garage rather than sitting in the sun with the top removed.
Also, my little dogs can jump in with the seats removed They couldn't make it up to the top of the folded down seats.
Yes, keeping passenger side (which includes the center section) and removing only the driver side is an option. It works quite well and makes it a nice mini-van style setup. You can climb in easily from the driver side and slide into the rear passenger seat. It's a good option for old people passengers who would otherwise have trouble climbing into the back.
I guess I was just a little shocked at the 20 seconds it took to remove my wife's JK rear seat and the 1.5 hours it took to remove my JKU rear seat.
I guess what matters in the end is that if Jeep came to me right now and said "OK we read your post and we'll give you a refund and take the jeep back" I'd tell them not a chance!!!
|04-24-2013 08:34 PM|
Well, I agree it seems counterproductive at first. But 95% of the time, mine are folded down. So my thought is that I could reastically get rid of one and use the other side for additional storage. Check this thread out by moabite... http://www.wranglerforum.com/f33/cus...or-230185.html
|04-24-2013 08:04 PM|
|BlackOpsJeep||even then, removing a rear seat on a JKU makes no sense. You won't gain much more room anyway other than that recessed area behind the front seats. If they are desperate to haul that much more, save yourself a headache and get a hitch and small trailer or better yet, a hitch carrier or safari rack. Removing rear seats on a JKU? I don't see an advantage.|
|04-24-2013 07:11 PM|
|MudRunner||Maybe for safety reasons? That's about the only thing I can think of. Or it was just plain easier?|
|04-24-2013 07:02 PM|
It is always nice to be able to remove a rear seat, when the need arises for extra hauling capacity.
I believe that the valid point that he is making is, why did Chrysler make it so difficult to remove the rear seat? Why not make it simple like the two door JK?
|04-24-2013 06:47 PM|
|Lowerumble||Did you remove just the one side? Can you post pics leaving in just the passenger? I would actually consider that as an option. I rarely need the rears for actual passengers(mostly room for dogs and gear). But I would like a "third seat" for occasional use. There is a member on here that removed them and then had a custom built back area with storage that was flat.|
|04-24-2013 06:39 PM|
Ya, if you remove them you have an uneven big indention in your back area.
Seats fold flat in about 5 seconds and give you a huge area.
Now, if you were taking then out to rhino/linex, then yes, I feel your pain! Was difficult to get them out, even more difficult to put them back in if I remember correctly.
|04-24-2013 06:36 PM|
They aren't designed to be removed quickly. The thought is why would you have a 4 door if you don't want back seats. They fold down flat for more storage room. I assume you were trying to remove them to line-x (or some other similar product) the tub?
And why does this indicate the four door was an afterthought? Just curious
|04-24-2013 06:26 PM|
Hey jeep, thanks for nothing with the JKU's rear seat
I mean seriously.
The 2 door's rear seat does a quick jiggle and wiggle and boom, its removed in a few seconds. I mean even a stubborn hateful person who uses Windows XP and watches over-the-air basic tv could love that rear seat.
For some reason the 4 door's rear seat contains about 10 bolts and nuts, some torqued to about 150ft-lbs, and has to come out in two sections. If wanting to leave one side in you don't have a choice which one. It has to be the passenger side. And good luck trying to quickly reinstall the seats for passengers to use. I hope they aren't standing there waiting.
Jeep, could you make it more obvious that the 4 door was a quick after-thought that some young hot-shot product manager threw out there just to impress upper management?
Ok im done.