|04-27-2013 09:27 PM|
|1rbotma||i had 35s and stock gearing on my rig and after a year and half my spider gears got a little torn up after one incident. lol.. get a d44 for the rear a super 35 kit and chromolly shafts for your 30.|
|02-14-2013 11:00 AM|
Having the 6 spd you can run 4.88's and 35's, but be careful the D35's and 35" tires are not ideal at all and you are pushing the boundaries with the D30 as well.
Shop around and make sure they know what they are doing or you'll be redoing them again.
Try and find a D30 HP out of a late 90's Cherokee and a ford 8.8 or dana 44. It's much easier to regear, add lockers, bracing/truss and etc. when they are already out, then it's a matter of swapping everything out over a weekend with a buddy. This way you get much stronger axles and your vehicle isn't down for a long time. You can sell the old axles to get some of the money back when you're done.
IMO it's a waste of money to regear the D35 and LPD30 if you are running 35's for any serious off roading. If it's a mall crawler then you'll be fine.
|02-09-2013 08:30 PM|
|Joe Roberts||4:56 will give you what your looking for if you are running the dana 30 & 35 axles I believe you will also need new carriers for anything lower than 3:55's|
|02-06-2013 12:20 PM|
I have a lifted Wrangler with 35" tires. Presumeably the stock 3.07's. What would be a good ratio to change to so I get my power back? 2006--6 spd.--4.0 ltr. I know that this isn't a cheap upgrade but I am wondering if there is anyone out there that can do this service for a 'reasonable' price. I've been getting some ridiculous quotes! I'm in the Muskegon, Michigan area. Thank you!