|10-28-2013 01:51 PM|
|JeepJT04||I have somewhat of the same issue. Mine is a minor humming bud can clearly be heard. I have a 2 inch lift. Just started about 3 weeks ago. Have had lift for almost a year. Buddy of mine said he thought it was the rear diff.|
|04-30-2013 06:02 AM|
So apparently the humming/noise in mine was traveling up my driveshaft and centering in my transfer case, so that's what I thought it was, considering my 4lo was going out. Turns out, I didn't have any rear brakes.... They were completely wore out/gone, basically it was metal on metal grinding and making all the racket. So I got all new rear brakes and my issue was solved, no more noise or anything, I can finally hear my tires and motor again lol.
|04-29-2013 10:47 AM|
|Jerry Bransford||Mechanics at those types of places are little better than Jiffy Lube oil changers. I'd go to a 4x4 shop that installs ring & pinion gears, they will have sufficient experience with problems like that.|
|04-29-2013 07:36 AM|
Dropped the Jeep off at Firestone Thursday...they told me it was the wheel bearings. After that was done they called and said that I still had noise in the rear but it was "a little better."
So basically I need a new rear end and all the work they did was money wasted.
|04-23-2013 01:16 PM|
|037jeff||I have looked as best I could, talked with a couple mechanics and it looks like it could be(hopefully not) the pinion bearing(s). I dropped it off this morning at the shop. Hoping to hear back soon.|
|04-23-2013 08:16 AM|
|04-20-2013 11:39 AM|
|037jeff||I am experiencing similar issue with my jeep. I also have noticed the humming/vibration goes away if you turn the over drive off. What are they charging for a ring and pinion these days?|
|04-20-2013 11:19 AM|
|Harry7409||Just got my Jeep back from the shop. Ring & pinion were shot, carrier bearings were trashed , replaced rear cover with new aluminum one with fins and holds more gear oil to keep it cooler going forward. Basically new rear end. But most importantly the noise is gone.|
|03-25-2013 08:12 PM|
That's how I understand it and I know I'm pretty correct based on my mechanic and Tom Woods explaining it to me when I went through the process not to long ago.
|03-25-2013 08:11 PM|
|BLK00TJ||Do you have any play at all at the pinion? Any fluid leaking out? What axle is it? a d35 may be swapped cheaper than a regear if you can find a donor with the same gear ratio which should be easy to do.|
|03-25-2013 07:57 PM|
|Harry7409||So I have had it to two different places and the guy I am now going to have do the work said is the rear pinion and gears and when it gets that loud its bad and a matter of time before they are gone and he actually imitated the exact noise over the phone. In talking with him I am unsure if I am going to just fix it, or regear and put in lockers or go axel hunting for something already set up with something in the gear neighborhood I am looking for. So now it's just how much I want to spend. I will update when I know.|
|03-13-2013 05:10 PM|
|Soli Deo Gloria||
Ok I just got my 01 wrangler not to long ago and am trying to figure this thing out. Last week changed all the dif fluids and today hop in and the same thing: when I accelerate vibrating a humming like crazy. Let off and nothing.
So I need to check my pinion seal/bearing?
This came with 4" lift and I changed the steering to accommodate but how do I check the angle to the rear you guys are talking about?
Any help is greatly appreciated. Thanks
|01-24-2013 02:58 AM|
Im kinda having this same issue, except i dont have the vibration, just the noise.... Its a constant humming that gets higher in pitch while accelerating, but goes away when you let off the pedal. I checked it out last week jacked up the rear end and changed the rear diff oil (which happen to be full of water...) and everything looked fine, and so i put it in neutral and spun the tires, and the noise was coming from my transfer case. Pretty soon im gonna get back under it with one of my buddies and take the transfer case completely out and take a look at it and change parts in it and change the oil and see if that helps.
Also my jeep is all stock. So i dont have angle and everything to worry about with my driveshaft.
|01-23-2013 09:09 PM|
|Harry7409||Thank you all I guess I know what I'm going to check first.|
|01-23-2013 05:55 PM|
|Jerry Bransford||Increased drivetrain vibration during acceleration is often caused by the rear pinion angle being a tad too high. The pinion angle lifts slightly during acceleration so if it's a little too high to begin with, the additional torque during acceleration can further raise the pinion angle enough to cause vibrations.|
|01-23-2013 05:05 PM|
|01-23-2013 02:28 PM|
|Bigkidneys||Mine sounded similar and turned out to be bad Pinion and Carrier Bearings in the rear diff. Sounds can be deceiving as I was thinking it was from the tranny. Had a mechanic ride with me down the road and he pinpointed it within 30 seconds. Least to say he his now my go to guy for anything I can't or won't do myself.|
|01-23-2013 12:31 PM|
|00tj2||It could be a number of things but my guess would be the rear pinion. Mine is doing the same thing. I'm sure its the bearing in mine and it sounds like it can be it in yours.|
|01-23-2013 12:24 PM|
Help! Vibrating/ Humming sound when i apply the gas pedal
I have a 99 TJ i have put on 1.5'' body lift, 1'' motor mount lift, UCF Ultra High Skid plate for the TT and a 2.5" suspension lift. I contacted Tom Woods and got the correct SYE kit and shaft and i know my angle is correct.
Every time i step on the gas i get a noise like a loud hum or a sound like something is out of wack as soon as i let off the gas it immediately goes away.
I reused my original transmission mount because it looked fine not sure if any one else who has done the Tummy Tuck has experienced this issue. i was contemplating Dynamat sound deadening material to line the floor to see if that helps but as of now i can't go on the highway without getting a headache.