|12-19-2006 09:36 PM|
You were right to tell me that, sheesh, I hated it. Felt like I was swinging in the wind. I won't be playing that game again.
|12-16-2006 04:30 PM|
Get yourself a set of JKS "Quicker Disconnects." They allow you to disconnect the sway bar and fasten it out of the way on included brackets for off-road use, and reconnect it for on-road use.
The process of disconnection/reconnection takes all of 30 seconds.
Here's a link to an installation and review. Try 'em, you'll like 'em:
The practice of leaving the rear sway bar hooked up, with the front one disconnected for highway use is highly dangerous, and induces over-steer. Not to be melodramatic, but a fast input on the street (wet or dry) and you could be looking out the windshield in the direction you just came from rather than where you were planning to go.
The new JK Rubicon comes with electrically activated sway bar disconnect, but it defaults to the "connected" position above 18mph for safety. That should tell you something!
|12-14-2006 10:15 PM|
|tiny terror||K, Dad|
|12-14-2006 09:22 PM|
|mrbigjeep||please be careful tiny.|
|12-14-2006 06:44 PM|
|tiny terror||Thanks. I'm going to disconnect them this weekend to see if my driving "style" will keep me shiny side up without them.|
|12-14-2006 06:40 PM|
|12-14-2006 06:37 PM|
|tiny terror||Which do you disconnect, top or bottom? And do you just leave the bar hanging or do you yank the whole thing out of there?|
|12-13-2006 06:18 PM|
It does definitely take some getting used to. I run my anti-rock on the loosest settting all of the time which is darn near like not having a sway bar at all. If you drive on the road without it then just realize even more that you aren't driving a sports car and you'll be fine. Don't take corners in your neighborhood at 40 like you used to and you'll keep the shiny side up.
However disconnecting your sway bar while off roading will be abuot the best thing you can do to keep your tires in contact with the trail. The more you keep your tires on the ground the better traction you will have.
|12-13-2006 05:38 PM|
Call me a sissy.....
I recommend you try it on a relatively abandoned road......I felt like I was swerving all over the road with mine disconnected.
|12-13-2006 02:24 PM|
|tiny terror||It's not going to tip over or anything is it? Just sway?|
|12-13-2006 02:20 PM|
|12-13-2006 02:07 PM|
|tiny terror||I'm assuming then, depending on how you drive, it's best to keep them hooked up if the beast is your daily driver.|
|12-13-2006 01:36 PM|
|hd1832||Disconnecting the sway bar links allows the suspension on each side to have much more independant movement in an off-road environment. When connected the sway bar tries its best to limit the differential movement.|
|12-13-2006 01:19 PM|
|Scooby||Iam new to this, but if I understand correctley the sway bar links attach to the sway bar which keeps the body roll to a minimum. If you remove (permanent, or quick disconnect) the links the body will roll more and it will also alow the vehicle to articulate more. Wow, did I say articulate? That is my biggest word since elevator! I hope Iam close to a accurate description, but if Iam not Iam sure that someone will correct me. Like I said, the Jeep thing is new for me. Scooby|
|12-13-2006 01:03 PM|
I wanted to ask this yesterday, but didn't want to hijack your thread.
What's the purpose of disconnecting the sway bars? I mucked around and read some stuff but I guess I'm not getting the gist of it
|12-12-2006 10:52 PM|
|12-12-2006 09:05 PM|
|rickr||don,t buy oem! very cheaply made. you don,t want your links popping off on road or off road!!!|
|12-12-2006 08:29 PM|
|AzTJ||Stop buy a local AutoZone or Checkers... they have some nice EnergySuspension polyurithane endlinks that work great for stock replacements for about $30(?). Otherwise they'll cost you prolly $40+ at a dealership.|
|12-12-2006 07:27 PM|
Sway Bar Links
Thanks to your help finding my rattle up front, I believe that it is the sway bar links, there seems to be alot of play on the top where the link attaches to the swaybar. I will not be doing the off road thing so I really do not think that I need the quick disconnects. Is it ok to just buy OEM replacements? I have also seen some on Evil Bay that look like OEM replacements for about $50.00 to my door. I have not checked the price with my dealer yet because I wanted to check with you first. Thanks again for the help. Scooby