|05-04-2013 05:09 PM|
|Glossy422||I would pull the coil pack. Might as well replace the plugs. Then make sure the pak is good and that the connectors on the inside arent messed up. Then check all the cables from the pack. I think they are back toward the cab. There is a little connector back there.|
|05-03-2013 06:37 PM|
|Azylkie2809||One the coil pack itself how can some tell the diff from a n b? Also do u guys think it has anything to do with the cam sync?|
|05-03-2013 05:12 PM|
|Glossy422||Hey I looked around and found this: http://www.obd-codes.com/p0352. Hope it helps.|
|05-03-2013 04:40 PM|
|05-03-2013 02:51 PM|
|Azylkie2809||Well it runs now turns out a injection cable rubbed through n caused the fuse to pop... Now I'm getting code p0352|
|04-30-2013 09:26 PM|
What diagnosis have you performed so far? Have you checked the ECM for codes? That's the first thing I would check.
I've also seen this scenario happen when the key loses its registration to the computer. The engine will turn over but the ignition won't function. This can be common with non factory keys or if there is only one key registered in memory.
|04-30-2013 05:39 PM|
Hey guys I have a 04 wrangler with a 4.0. No spark..I replaced the coil and crank shaft sensor still nothing...I hear the fuel pump priming switch the fuel pump n horn relay around...still nada