|11-24-2013 09:49 AM|
|11-14-2013 05:33 PM|
|11-14-2013 04:13 PM|
|MANGOJK15||I'm an Alpine girl so I recommend the Alpine SPR-60C Type-R.|
|11-14-2013 03:08 PM|
|8-Man||How important is it to make sure the replacement speakers are 2 ohms? I plan on keeping my 430N head unit and I noticed the Kicker factory replacement speakers are 4 ohm.|
|11-10-2013 12:12 AM|
6.5" Component Speakers (Impedance (Per Voice Coil): 2*ohms) at Sonic Electronix
(Do not get the 60.9s, their tweeters are too large for the OEM pods.) If you get the polks, you will actually LOSE volume (not clarity) because they are 4ohm speakers and the OEM amp runs at 2ohms. If you are using the stock system with the stock amp, get 2ohm speakers and as high sensitivity as you can get.
|11-09-2013 10:16 PM|
|Galenat||Today I installed Polk db651 speakers in the front and the sound bar. They sound awesome! I had to mod the mounting plate a little to get them to work. I was able to fit the factory covers back on the sound bar. Next step is to replace the stock HU!|
|11-03-2013 03:12 PM|
|bigkevj||I've had my polka in for 6 months, and love them. Very easy install in my 13.|
|11-02-2013 05:37 PM|
Any advice? Install smooth?
|05-02-2013 11:49 AM|
I initially kept them silver, the way they come from Polk.
But I didn't care for the contrasting silver so I painted them flat black.
Much better this way IMO.
|05-02-2013 11:24 AM|
And someone turned me on to this write up - even better:
Love all the help on this forum!!
|05-02-2013 11:21 AM|
BTW - here's an install write-up I found from quadratec:
|05-02-2013 11:18 AM|
I really wanted the DB651's all the way around, but they don't fit in front because of tweeter protrusion, and you can't really make them stealth in the rear.
If I had to do it all over again, I would probably consider DB6501's all the way around. Now that I've had the Jeep for a few months, I'm more willing to Dremel the tombstones aand put some holes in the soundbar for new tweeters. Of course, to make it sound right...that requires a new amp....and I'm not quite ready to go that far, because for me, I would go with a new HU while I'm at it.
|05-02-2013 10:36 AM|
You are of course correct. I had assumed that the slimline speaker was essential because the base of the magnet in the slimline unit touches the top of the soundbar, so I couldn't see how a deeper cone was going to fit. I went to the Polk website and compared dimensions, and the speaker depth of the db651 and the db651s is identical. The difference is that the db651s has a flatter profile, thus allowing the factory covers to be refitted; if you use the Polk covers, which I presume is what you have done, then there's no issue at all with using the standard db651 in the soundbar.
Given the full size speaker has a much better frequency range and slightly improved power, I'm now annoyed with myself for not looking at this properly as I would have sacrificed the factory covers for improved performance. If you're not insistent upon a stealth install, this is a better route to go.
|05-02-2013 10:06 AM|
I ended up going with the db651s all around.
Since I'm running the stock amp and not planning on changing that out anytime soon, the crossover for the component speakers would have been a pita since the amp already has a crossover.
I got the speakers for around $60 on amazon, so no harm done if i decide to upgrade the hu and amp later and want to change out to the component speakers.
|05-01-2013 08:24 PM|
I used the db651, not the db651s.
|05-01-2013 08:20 PM|
Just fyi, you need the shallow mount db651 speakers for the soundbar. The standard db651 won't fit.
|05-01-2013 05:04 PM|
|panthermark||When available, use components. The problem is that whack 2 ohm amp and lame 3 band EQ are still powering new spakers in the stock premium system. If you want the components to sound amazing, get a real amp. But adding a real amp means jumping through some hoops...and if you are going to go that far, you might as well add a real HU while you are at it.|
|05-01-2013 03:55 PM|
Components are always preferred to coaxials, but the way they're amped is important.
I'm not sure how the system in your Jeep is amped or crossed over. My factory "premium" system has an amp that I bypassed when installing my front component set. I ran directly to the HU and used the supplied cross overs.
|05-01-2013 03:28 PM|
Glad I found this thread! I'm looking to upgrade speakers in my 2013 jk Sahara. I'm keeping the 130 hu for now-may upgrade later.
I was looking at the polks. What are your thoughts on going with the db501 components vs just replacing the woofers with the db651s.
I'm also thinking of using the db651 in the soundbar.
Thanks for your input.
|02-19-2013 10:29 AM|
Here are some pics from my build thread. I installed the MM6501 components up front and the sound upgrade is amazing. The bass is so much harder and cleaner now. No more distortion. I wired them direct to my Pioneer HU.
I simply popped out the stock tweeters and unplugged them. I taped the wire secure to another wire behind the pods.
I used a sanding bit on my RotoZip to round out the pod a little larger. It's not important to maintain an exact circle becuse the new tweeters have a beauty ring that will cover the rough edges up.
|02-19-2013 09:03 AM|
|nobndry||Oops i hit send instead of + image|
|02-19-2013 08:59 AM|
|nobndry||Here is the picture|
|02-12-2013 09:45 AM|
|02-12-2013 08:56 AM|
The tweeter tombstones must be cut to accomodate the Polk tweeters.
|02-12-2013 06:30 AM|
|Jeep757||Any problems/issues and/or tips for installing the tweeter in the dash tweeter location?|
|02-11-2013 04:26 PM|
|bigkevj||I just installed Polk db651s in the sound bar this weekend. incredible difference over stock. I just bought two more to put in dash. running kenwood dnx6190hd head unit.|
|02-11-2013 03:45 PM|
|Jeep757||I'm still using the stock HU but I do want to put in a BT HU so I can loose the aux cable for my music|
|02-11-2013 02:18 PM|
|termite||Are you guys all running stock HUs? I was shopping for fronts, to go with the Infinity 629I Kappa's I put in the roll bar. My concern was the tweeters that stick out from the Kappa's interfering with the non removable front grills (idiotic design). Those Polks look like they may fit the bill, but I wonder if 2ohm would be better.|
|02-11-2013 02:11 PM|
|thomm99||x whatever for the DB. Used those all around in mine and they have been great.|
|02-11-2013 12:49 PM|
|mcsjk2008||Go with the DB's... Installed them about a month ago in mine and I love them. They sound awesome and I have no complaints. Plus, they are marine grade so I don't have to worry quite as much about a little bit of rain ruining them.|
|This thread has more than 30 replies. Click here to review the whole thread.|