|05-03-2013 02:12 PM|
Probably won't work out in your favor!
Glad you got those pesky doors off.
|05-03-2013 10:54 AM|
|05-03-2013 08:22 AM|
It also took me about 30 min of pulling and shaking to get my doors off for the first time
|05-03-2013 08:08 AM|
|Neil F.||Again, the nuts don't need to go back. I cut the threaded portion off years ago so it does not show. (How would the wife even know?)|
|05-03-2013 08:02 AM|
|Rayko||Whether its my full doors or half doors, I don't bother with the nuts either. If someone wants your doors the nut isn't going to stop them.|
|05-03-2013 04:08 AM|
|Dep863||I never put the nuts back on, the doors aren't going anywhere!|
|04-28-2013 01:51 AM|
|Virus692||Just a lil update... it took a pneumatic chisel to get that damn. Nut off... I will cut the bolt flush until I decide what hinges I wanna replace it with... tried everything here got pissed and had it cut off.|
|04-07-2013 12:57 AM|
|Some Farkin Guy||
Try applying downward pressure on the nut while loosening it. Once you get it off you're going to need a tap and die set to get those threads fixed. Alternatively, if the lock you're talking about replaces the nut, then just use a nut splitter. Also, if you've never removed your doors before, you may have trouble getting them out of the hinges. The first time was a real struggle for me, but once you get them off put some lithium grease on the pins.
|04-07-2013 12:19 AM|
|04-06-2013 09:44 PM|
|baker3||Try wedging a flat blade between the nut and hinge and put pressure on the nut while trying to loosen it. Mine was stripped as well and thats what I did and it came off. I never put any back on, its just not worth my time.|
|04-06-2013 09:44 PM|
|larjeep||Cut the nut off and re thread the pin with a die.|
|04-06-2013 09:42 PM|
|BLK00TJ||You can try a nut splitter and hopefully the threads on the pin are still in good shape.|
|04-06-2013 09:39 PM|
Wife's rule " if it is on there it stays" AKA must work as designed... Plus I am thinking of locking them
|04-06-2013 09:28 PM|
|amiller||If you can get that nut off of there, dont worry about a new pin. You likely wont be re-installing the nuts anyway. There will be plenty of pin left to do the job of holding the door on the hinge.|
|04-06-2013 09:24 PM|
Wanted to Remove doors... BAD LJ
Hello Guys n Gals ,
I tried to take the drivers door off My new to me LJ and the PO killed the top Door pin by stripping the nut after putting it on the door(nut spins but will not come off)... so my Question is can you just replace the pin or do you have to replace the whole hinge?
I am going to have to cut the nut off the door ... Please tell me my options
I found the hinges on morris but cannot locate just pins... I found bushings (ratings say they suck) but no pins HELP A BROTHA OUT HERE THANKS
Wanna be set free... and Ride topless...