|03-25-2014 03:17 PM|
I've had no other problems so ya, I'd put it in the "semi-good" category.
|03-25-2014 03:12 PM|
|Mr.Dave||So a couple of loose ends were touching and shorting out? otherwise it is a semi good unit?|
|03-24-2014 01:05 PM|
I finally got around to pulling the head unit out. I canít believe I procrastinated so long, it was only a 20-30 minute job. My theory from troubleshooting was that some connection in the back of the radio was loose and/or making contact with something.
When I installed it, I enabled all features available regardless if I thought I would be using them. I had a wire with I-pod and MP3 player plugs I had routed to the glove box. There were also pigtail connections for various input and output items (video, audio, etc. that were attached to the back of the unit.
I disconnected the wires to the glove box and removed the pig tails as much as I could (a couple were wired into the main wiring harness) and viola! Problem solved.
I just did this over the weekend but for the past couple of days Iíve had no problems.
The bottom line is that with the extra wires and connections to the back of the unit, one or more was intermittently shorting out. I guess this is not the best head unit for a Jeep that will be bouncing off road, at least not with the additional connections.
I guess you can say this subject is now closed.
|11-11-2013 05:24 PM|
|Y-Guy||Beast thanks for the update, often you never hear how these type of deals work out over time. I've been a long time Woot! buyer but I've found if its off brand it carries a fair amount of risk, but I appreciate you're follow up on this project.|
|11-11-2013 03:25 PM|
Hi guys, I just wanted to update everyone on this head unit.
Okay, its 6 months after I installed it and I'm rather disapointed in it. About a month ago, it would randomly think I was trying to access a nav feature (I am guessing) because the radio would shut off and I would get a message on the screen "Attention: This feature is not available while driving". I have to press the radio button to clear it. It has become more and more frequent and is a real pain in the butt.
I have tried to trouble shoot it without taking the unit out. It doesen't seem to be effected more or less by heat or cold, driving or parked. At first I thought it was a loose wire, but one time it happened while in my driveway. I also thought it might be caused by the heater so I drove to work cold one morning and it still did it.
I couldn't find the post (I'll look again) but someone said they jumpered one of the connections so the unit never knows when its driving so maybe I'll try that.
At this point, I wouldn't recommend anyone but a Metra head unit no matter how good the price is.
|06-17-2013 09:56 AM|
|06-17-2013 07:55 AM|
|Mr.Dave||That is the only problem with in-dash units...upgrading the maps. There has to be some free stuff out there somewhere|
|06-16-2013 09:41 AM|
Horizon Navigation | Home
|06-15-2013 11:35 PM|
|Olsen185||How does it compare to the stock navi units?|
|06-15-2013 09:44 PM|
|Big Fran||I need to take mine back out and send it to their service place. I spoke with them on the phone and the Bluetooth icon should turn from blue to another color when it tries to pair and mine just stays blue. They are going to put a new Bluetooth part in it.|
|06-15-2013 09:30 PM|
|ScottyHue||What sort of phone do you use? I ran into trouble when pairing, but quickly fixed by entering pass code into the phone found in the radio manual..|
|06-06-2013 08:46 PM|
|06-06-2013 04:40 PM|
|Big Fran||I just installed this unit in my Jeep today. Everything works well but I cant get the bluetooth part of the radio to go into "PAIR" mode. Can anyone with this unit tell me how they did it?|
|05-17-2013 06:27 PM|
Yes, you have to take the 2 screws out that hold the warning tab. If you don't take them out, you can't play any CDs or DVDs. I have some aluminium tape so yes, I covered the holes with it. I would assume you could use something else but just make sure it is something that can withstand the heat from the unit and from the sun beating down on the cover.
Hope this helps.
|05-17-2013 06:16 PM|
Did you notice the little yellow tab across the top of the Metra Aftermarket Radio that says "Warning: Replace this tab with 15mm tinfoil paper." Is that crucial? It would seem so...
|05-06-2013 02:20 PM|
|05-06-2013 11:57 AM|
|05-06-2013 11:22 AM|
Metra Direct-Fit MDF & MFK Car Stereos | OEM Replacement - YouTube
|05-06-2013 08:03 AM|
|Mr.Dave||The GPS works fine through the top. It is fiberglass, GPS antennas only have trouble when shielded by metal. From the factory, the GPS antenna is located on top of the soundbar under the padding. so you should be fine with the location. That radio looks great.|
|05-06-2013 07:11 AM|
|bbd08unlimited||I'm curious about how the touch screen works. Can someone post a video going through the features and menus and maybe a short clip of the navigation in action.|
|05-06-2013 04:39 AM|
Maybe worth experimenting with it before you depend on it to get ya somewhere! My wife can't read a map, so I love having my windshield mounted Garmin with me.
|05-05-2013 10:50 PM|
|05-05-2013 10:13 PM|
Looking for some feedback on interface quality. I currently have the Pioneer Appradio 2 and its ok. Love the interface, just lacking in features (like Bluetooth mute on screen, have to use phone).
You happy with it or is it cheap looking?
|05-05-2013 10:00 PM|
|Rufus T. Firefly||
Nice to see it installed! Unfortunately I couldn't install mine today. Work interrupted my day off. Although I got the harness assembled between work issues.
|05-05-2013 09:50 PM|
I see they are for sale from Sonic Electronics for $300 now.
Metra MFK-6511-XSVI-1 Chrysler MultiFit Multimedia Car Stereo Kit
|05-05-2013 09:45 PM|
I was a little disappointed in the volume until I noticed it could be adjusted on the amplifier interface unit.
After the install and adjusting the volume, I just sat in my Jeep listening to the radio. I had forgotten how nice it is to have a good stereo.
|05-05-2013 09:37 PM|
|truthiness||how much was this on sale for?|
|05-05-2013 09:26 PM|
|scottmphoto||Looks great!! How is the sound and stuff?|
|05-05-2013 08:22 PM|
W00t! I finally got my head unit installed (I found a couple of crossed wires so that's why I wasn't getting any sound out of the right side)
When I spread everythng out it was a little overwhelming but I just took it one step at a time. I wasn't planning on doing a write-up but thought I'd pass on my lessons learned.
To start out, you need to put together your wiring harness. Don't even bother removing your old head unit yet since the harness will take you a while.
The connections were pretty straight forward and all but a couple of wires are labeled. There are a couple of things I had to work out though. Thanks to otaku30 for the exploded wiring diagram, it came in handy.
The brand of my CTHO-03 harness is Axxess, but other brands should be the same.
Here are a few of my lessons learned:
1. The instructions talk about THE ignition power wire and THE ground wire but there were 2 of each so I combined them when attaching. Make sure you don't confuse the battery power wire with the ignition power wire.
2. You are right Rufas, the antenna pig-tail included in the kit is the correct one. I had to violate the #1 cardinal rule in electronics installation to make the connection: I forced it together. I was expecting a standard fit but it was really tight.
3. Thanks to the information from woansleftpeg and Rufas T. Firefly on the bracket. My rig is an '07 and it was a bee-otch but it finally came out. I removed the 4 bolts and cut the pegs securing the wiring harnesses. I had to remove a couple of extra screws from surrounding attachments and was able to work it out. It came out, but the word easy would not describe the operation.
4. I never use a hard top so I routed the GPS antenna up the A-pillar, across the roll bar and attached the "puck" on the roll par cross member just behind the driver's seat, under the padding. The GPS is working great for now, hopefully there will be no signal degradation when I put the soft top up.
|05-05-2013 09:11 AM|
|Rufus T. Firefly||
I did see a video where it came out easily but for a different model year. So cutting it is.
|This thread has more than 30 replies. Click here to review the whole thread.|