|05-03-2013 05:53 PM|
Dana 44 question
Hello fellow Jeepers!
I'm a noob to the site so bear with me. This is my first post.
I have a spare rear axle that came with my Jeep when I bought it. It is a Dana 44 (605329-2HH) out of a n 87-92 Grand Wagoneer. The rear axle I am running is a Dana 44 (605342-4TV) out of an 87 XJ. All of this based on the numbers I pulled off the axles themselves. My question is, will the axle shafts from the spare fit in my current axle?
The rear is a 59" axle with a 5 lug pattern, and the front is a 61" with a 6 lug pattern. I currently have spacers on the back to convert from 5 lug to 6 lug. The spare is a 6 lug.
Thanks for any help!!