|05-05-2013 07:32 PM|
|05-05-2013 11:56 AM|
|fred0000||Perhaps a silly question. But can I go between drive and overdrive on the fly?|
|05-05-2013 11:40 AM|
This is what I did. May not be fancy but it works.
I didn't think OD off would be that dofferent I am glad I "fixed" it.
|05-05-2013 10:24 AM|
|fred0000||after asking Hercules to remove the transfer case shift knob for me and removing the 4 screws that hold in the center console I realised the black portion of the center consol with the cup holders is only snapped into place, this is all that needs to be removed (I started in the center storage area) will report back, probably just going to solder in a new momentary button as the factory one doesn't look user serviceable, bummer.|
|05-05-2013 09:42 AM|
will search the consol for screws, I'm just wanting to approach this cautiously and not damage anything
|05-05-2013 09:24 AM|
|Smokinjoe||Button should be flush. Think four screws hold console down|
|05-05-2013 09:20 AM|
2010 wrangler automatic overdrive button
I've done some searching and all I get find as that this is fairly common no help really.
I've had my jeep for about 3 weeks now and for my normal everyday driving and comute having the overdrive on makes sence and is a no brainer. went for a drive yesterday and having the "OD off" would have been nice for the roads I was using.
the button seems to be caked in crud and feels solid when I try to push it, I don't know if it's supposed to sit proud or what but it's flush with the bezel.
what i'm hoping to find out is how to take the center unit apart to get to the button to either clean it up or replace it
any help would be AWESOME.