|05-18-2009 11:47 PM|
|cnolan76||They had them at sams for a little over 50 bucks, but I got mine from amazon for 61 or 62 plus shipping.|
|05-18-2009 11:00 AM|
|erickpl||Where did you find that MV50 compressor? Heard LOTS of good things about it!!!!|
|05-17-2009 11:16 AM|
O.k. I found a very detailed walk through on exactly what I am trying to do if anyone is interested.
4x4Wire - Portable Onboard Air Installation
|05-16-2009 04:03 PM|
|bmanrkg3||I too am interested in this setup...|
|05-15-2009 10:46 PM|
|jdhallissey||FYI run your tires around 28-30 psi and thank me for saving your back. To run the compressor you can find the install kits instructions online maybe somebody has them on here they can lend up.|
|05-15-2009 10:44 PM|
trying to build a cheap on board air
I just got my superflow Mv-50 (Masterflow 1050 to some) today. It puts out 2.5 cfm and I tested it out by airing down a tire and airing it back up with the compressor. I have to tell you, for 62 dollars this thing rocks! I haven't timed it yet, but it aired up my 31's from 15psi back to 38 really quick. I did alot of research on this unit before I bought it and alot of people think it is made identical to a viair. Anyway, i am going to hardmount the compressor and hook up a tank to it. I need some help trying to figure out what else I will need to hook everything else up. I know I will need a tank, pressure switch, safety valve, manifold, and various couplers and adapters. Does anyone have any suggestions as to what else I will need?