|05-09-2013 08:40 AM|
I would think pulling a ground wire would disconect the circuit, leaving an open circuit causing nothing on the radio but also no fuses to blow.
If your blowing a fuse, somewhere + is touching - causing a short.
Check for pinched + wires that could be touching ground (metal) somewhere.
|05-09-2013 05:24 AM|
|Grizzlycb||I work 430pm to 430am its really hard to trace down when it's still dark out side when I get off to actually work any suggestions would be nice so I can just track it down before work|
|05-09-2013 04:12 AM|
Where is the stock ground wire for the radio?
I got in my jeep today and started it up to go to work. Radio was working and pulled my ebrake and my radio cut off. I realized I blew a fuse I replaced it and it blew again. So I'm guessing I pulled my radio ground. Any clues? I know it's somewhere around my ebrake