|05-28-2013 12:49 AM|
So, I've changed up the plan a little bit after more research.
Rancho 9000xl (est. $260-270)
2.5" OME MD Front Coils ($170)
2.5" RC Progressive Rear Coils (est. $100-140)
-if necessary, adjustable track bar
BFG 33s ($340 on CL)
Aussie Front Locker ($250 w/o install)
JKS 1" mml ($80)
JKS 1.25 bl ($120)
I'm not quite sure on the order I'll do things, though.
A) Put on the tires and deal with the awful street driving until I can afford to regear (it's a DD so...)
B) Save for tires and regear, but I'm not sure if I'll favor the look
C) Save for tires, regear, and locker, install it all at once without paying for labor 2x.
I'm thinking C is the most efficient idea. Any thoughts appreciated!
|05-20-2013 01:06 AM|
|OmniscientHiers||Ah, okay. Thanks a lot for the help!|
|05-19-2013 09:52 AM|
|05-19-2013 03:37 AM|
|05-19-2013 03:27 AM|
Forgot to add, one of my wheeling buddies added a 2.5" OME like you were looking at. He did add their rear trackbar bracket, not sure if it was necessary but just thought I would mention it.
|05-19-2013 03:12 AM|
EDIT: Would you recommend the whole kit, or just the swaybar?
|05-19-2013 02:45 AM|
From personal experience, the Antirock is a far superior swaybar compared to JKS QD's. I hated disconnecting/ connecting the old JKS links. Trying to find level ground and getting hands all greasy/dirty sucked.
Savvy BL is better. The body pucks are cupped to sit around the factory pucks perfectly, and the grill snubbers are superior to JKS IMO.
All MML spacers are pretty much the same.
Really with a 2" lift I don't think adjustable trackbars are necessary and just cause more headaches then they are worth. I ran a 2" lift on stock trackbars for a couple years with no issues at all. If you put adjustable trackbars you are likely to run into clearance issues and are going to have to bumpstop the crap out of it so you don't hit everything.
Just my 2 cents..
|05-19-2013 01:11 AM|
My plan is as of yet:
Rancho 9000XLs - front/rear
JKS Q Discos
JKS 1.25″ - or Daystar 1" BL, still deciding
JKS 1" MML
JKS Adj. front/rear JJ track bar
I would like to get OME Springs, but I'm not quite sure which ones. Anyone help with that? I found rear 2.5" med/hvy, but not front?
|05-10-2013 09:22 PM|
|OmniscientHiers||Yes, I'm definitely looking into a 1" mml and bl.|
|05-10-2013 08:40 PM|
|PStov98TJ||Sounds like a plan. You may need some other mods to fit 33's like a 1-1.25" bl or highline fenders such as metalcloaks.|
|05-10-2013 06:35 PM|
|OmniscientHiers||Gotta love the jeep community! Thanks for all the helpful links and information! In terms of what I would like: 2.5-3in lift with 33s, while being a dd plus capabilities of rock/desert terrain driving.|
|05-10-2013 10:25 AM|
Here's another good read. Ignore the pissing argument in it. Some good tech in this thread and Imped posted some other good reads in there. Some more reading that'll keep you busy for a while.
|05-10-2013 10:18 AM|
'rock crawling go-cart' or something - JeepForum.com
Music City Flop Project - JeepForum.com
Suspension Geometry - JeepForum.com
You'll notice my build thread has a "Suggested Readings" section.
Unlimited04's LJ Build - JeepForum.com
There is enough info above to keep you busy learning for at least a year. Consider it a prerequisite before doing anything.
|05-10-2013 10:13 AM|
|05-10-2013 01:32 AM|
|05-10-2013 12:59 AM|
|05-10-2013 12:56 AM|
|UFOtestpilot||You will also find 100's of examples at pirate4x4.com|
|05-10-2013 12:36 AM|
|thgr8alex||Agreed, it all depends on what your wanting to do and how high of a lift and how much money you want to spend.|
|05-10-2013 12:34 AM|
Go read Unlimited04LJ's build thread.
This is very possible. And parts needed are totally dependent upon how high you want to go, the size tires you want to run, and what you're planning on doing with the jeep.
|05-09-2013 11:49 PM|
Questions about a custom suspension kit
I searched the forums, but I failed to find a similar instance (wrong keywords?). Has anyone attempted a ground up suspension, or better put: buying each part individually. My main question is if it would be the most effective use of money in comparison to buying a complete lift.
Any feedback is appreciated