|05-29-2013 10:55 PM|
|joeg679||Does anyone know of an affordable solution for yellow LED fog lights? $80 for the white LED's is good, but I'd really like the yellow. Thanks|
|05-29-2013 01:35 PM|
|kash||Got my IPCW Tail lights in and the front Recons in also, Just wondering how and where to mount the resistors for the recons|
|05-29-2013 01:27 PM|
Went with "Jeep" for 3rd tail.
|05-29-2013 01:02 PM|
|ToplessTN||I have the Rampage LED CHMSL on the way, should have it installed this weekend. I'll let you know what I think.|
|05-12-2013 01:56 PM|
|HK_Runner||I am still struggling with the 3rd brake light. Well, struggling with what to use. Those lug-nut-like ones will not work for me. I need something above the 35" tire or on the hard top. Bright LED would be best.|
|05-12-2013 01:51 PM|
|05-12-2013 01:50 PM|
|05-12-2013 01:23 PM|
|HK_Runner||I wanted to get fogs as well, but I think I'll try the Truck Lite LEDs first, and then see if I need more. It's really on those dark and twisty mountain highways and roads where I need more light. The stockers are dim but adequate in the city. That said, we don't drive that much in the city at night, and when we do, we take the 4Runner. The difference in light is pretty significant.|
|05-12-2013 11:51 AM|
Here are some photos of mine right after the swap.
|05-12-2013 11:43 AM|
|05-11-2013 09:15 AM|
The Vision X LED fogs are 350$
The Fortec LED fogs are 80$
Seems like a huge difference.
As someone who plans to upgrade the fogs first, has little experience when it comes to lighting in general, and wanting to "do it right", I am interested to know if the Vision X set is really worth the 270$ premium.
Not opposed to spending the money to do it right, but just wanting to make sure it is money well spent.
|05-11-2013 07:48 AM|
|DaK||You will be most happy with the vison X fogs... If you use them with the stock headlights, you will definitely see the low quality of light the stock units provide.|
|05-11-2013 07:44 AM|
|05-11-2013 02:31 AM|
|rundm||I went with duelly's for the fogs. Just put them in yesterday and will see what they look like this morning when I get off of work.|
|05-10-2013 02:52 PM|
|Sgt93||What about using the Dually D2's as fogs in the fog pattern? I wonder if that would help keep them more usable? Or throw and amber cover over them?|
|05-10-2013 01:30 PM|
|05-10-2013 01:03 PM|
JK LED Fog Light replacement bulbs
These work well:
Jeep® Lights - Fortec® - FT LEDFOG1 - FORTEC® LED Fog Lights for 07-up Jeep® Wrangler JK and other Jeep Wrangler Parts, Jeep Accessories and Soft Tops by FORTEC
|12-30-2012 03:26 PM|
Thank you! You have all been a big help. I placed my orders today for all the lights. Woohoo!
I went with the Vision X fogs and Recon for the turn signals and the side markers. I ended up ordering the In Pro tail lights and 3rd brake light from Amazon. They were significantly cheaper than Quadratec. Also Quardratec's shipping charges are rediculous.
|12-24-2012 09:16 PM|
I have the truck lites... Love em. Put out a great beam and I like the white light. They do have a X (really V V pattern), but that doesn't bother me.
Good luck on the fogs. DO NOT GO DUALLY. I put in the regular (not D2) into my Rockhard bumper, angled all the way down and they are WAY too bright to be used as fogs. I could never turn them on if there were other cars around. Now I have bumper mounted AUX driving lights for when I would normally use high beams. The light is amazing but just too bright to be used as fogs.
After I do the SPOD thing, I may replace them with a set of Pilot PL360Cs I have lying around.
|12-24-2012 08:50 PM|
|12-24-2012 01:37 PM|
I have the JW Speakers prior to the upgrade they did. I love them. The difference between mine and the new ones is, the new ones doesn't have the fan to circulate the heat to prevent the ice over, but the new ones don't require trimming. Hilldweller says the trucklites put out a better beam, but they do have an X from where the lights cross, and that would drive me nuts. I have no complaints about mine, other than I can't see how badass they look on while I'm driving.
LED fog lights is strictly vanity. I prefer the JW Speaker look in this case too. The trucklites are cheaper in both cases, and getting a harness to covert h13 to h4 with supplemental power from the battery is recommend for the headlights. It will eliminate flicker.
Blinkers and taillights fall into the same category as fogs. I want to do the JW Speaker fogs just to match the bad-assery. I wanted to do the marker/blinker but have yet to find a swap with enough positive reviews for me to pull the trigger.
The 90mm projector from rallylights.com have to best reviews from Hilldweller and really change the look of you headlight, and seem to be available in every lighting option, halogen, led, xenon, etc.
|12-23-2012 07:11 PM|
I'm not sure how the VisionX fog lights compare to the Dually's but I had them bookmarked as a possible upgrade.
Rebel Off Road: Vision-X LED Fog Light Upgrade for Jeep Wrangler JK 2007+ - YouTube
VisionX Jeep JK Factory Fog Light LED Upgrade Kit
The LED's above for turn signals are cool. Definitely a good option. I also found this: Recon LED's with smoked lenses. Recon Jeep Installation Instructions - YouTube - they sell them for the side and front turn signals.
|12-23-2012 05:11 PM|
I've been planning the same upgrade. I'd like all of the lights on the Jeep to be LED.
As far as headlights go this thread has some really good info. Little long but worth the read:
JKOwners.com - The community for Jeep JK Owners
For fog lights I'm looking at Duallys (Dually). Although it kind of depends on what type of bumper you have. I have a Rampage Recovery Bumper. They will fit inside the fog light holes in the bumper. The stock fog lights fit in the bumper, so I believe these would fit in the stock bumper as well.
For turn signals (size 3157) I'm thinking of going with Putco LEDs (LED 360° Premium Replacement Bulbs by PUTCO). They will fit in the same socket as the regular filament bulbs, no modifications needed.
The side marker lights (size 3157 as well) can use the same bulbs.
For the tail lights, Quadratec has some nice ones (In-Pro Car Wear LEDT-420C - In Pro Car Wear LED Tail Lamps for 07-13 Jeep® Wrangler & Wrangler Unlimited JK - Quadratec). You can pick the background color.
The whole LED upgrade can be pricey. But I think It's worth it. The LEDs look great.
|12-23-2012 04:00 PM|
LED lighting upgrade?
I am inspired by some of the great looking JK's I have seen on this forum. Most recently JKashat's storm trooper project. I have a Call of Duty MW3 special edition in black and I would like to start with upgrading the lighting.
I have decided on a few items but I could use some help figuring out the rest. I would like to have a uniform look with all the lighting being LED. Thanks in advance for your help!
1) Headlights - JW Speaker 8700 Evolution (black)
2) Fog lights?
3) Front turn signals?
4) Fender side markers? Prefer black or smoke color lenses.
5) Tail lights - In Pro LED, ruby red