|05-12-2013 09:02 PM|
|Lane24||They are the M6 x 1.25's that attach your bow bracket to the roll ball in the back. I didn't have them with my soft top that I bought from another Jeeper, and they were $8 a piece !!! Yikes. They aren't in the box, and hopefully you already have the brackets installed if you had the dual top option. Wish I had known when I picked up the top.|
|05-12-2013 08:31 PM|
|skokie||Thanks. I will make sure I check tonight!|
|05-12-2013 08:29 PM|
If they aren't there, go back to your dealer and tell him he needs to give them to you; mine had two missing, my dealer said he was going to have to order them in so I marched the salesman out to the yard on the pretence of making sure that we were talking about the same thing, then when he pointed them out on another vehicle I insisted he take them off that vehicle and give them to me.
|05-12-2013 08:20 PM|
|skokie||Bought it new with dual top. Haven't taken off hard top as it has been 3 cold days.|
|05-12-2013 08:18 PM|
|05-12-2013 08:12 PM|
|skokie||The PDF from the forum says the 4 torx bolts will attach the soft top to the roll bar. I am clueless. I guess it may make sense during install (they may already be there) , but I didn't want to get that far in the install and realize I am missing parts.|
|05-12-2013 07:59 PM|
In answer to the question (if that's what the question is), I don't know. I got the dual top option so it was already attached using those screws when I took delivery.
|05-12-2013 07:56 PM|
|05-12-2013 07:52 PM|
Have printed a few instructions from forum users re: installing premium soft top when having desktop option. If it is 72+ tomorrow, I am going to attempt. Directions mention utilizing 4 torx screws? Where are those? Already being used with hard top? Those are the only pieces not in my soft top boxes. Thanks for helping the newb.