|03-03-2014 01:52 PM|
|sanman357||I have the AMP steps on my Ram. Just close the doors and pull the fuse at the battery.|
|03-03-2014 10:33 AM|
|03-03-2014 07:29 AM|
|03-01-2014 07:38 PM|
|Charlie14||Sorry to revive an old thread but I was searching AMP steps and found this thread. How do you guys keep the amp steps from folding down when you ride with the doors off?|
|08-02-2013 02:15 PM|
|Mopar2Ya||One of the nice things about the Power Steps is that they are a full 6" wide, not 2-4" wide like other steps.|
|08-02-2013 09:23 AM|
The RSE Sliders are nice and I had seriously looked at them at one point. However, they seem to be a very gen 1 product and I expect revisions over time that improve the product for the price they are asking. Just my opinion, but overall I'm sure they work great.
BTW, in case anyone wants to know, I went with power steps. They are sitting in my garage waiting to be installed this weekend.
|08-02-2013 08:55 AM|
|caryt||One thing I would highly recommend doing is adding additional holes and nutserts between the existing ones for additional support. This will help when you take hard hits.|
|08-01-2013 01:24 PM|
For those interested, here is another thread on the RSE steps.
|08-01-2013 12:16 PM|
I had the Bestop Powerboard (designed by AMP) for a couple of months.
They were really great for about a week, then they would bind and/or not work.
Contacted 4Wheel Parts who sold and installed them. They adjusted them on 4 different occasions and then gave up. Told me that is just the way they are.
So contacted Bestop who told me it wasn't a very good design for a jeep and I should return them.
So I did.
Just had Northridge 4x4 install the RSE Step Slider.
These are much stronger, but not without issues.
They are LOUD.
The step could be longer and give better coverage to they rear doors.
I thought it included a light kit, looks like I have to purchase that separately.
They are really expensive. I mean holy s#!+ expensive.
They took 5 hours Northridge to install.
So I will have to see if I like them over the long term.
|07-31-2013 10:44 PM|
|JK Coaster||I've had my AMP Powersteps for about a year now and am very happy with the decision. With my 2.5 inch Teraflex lift and 35's the measured ground clearance is 16.5 inches to the lowest part of the Powerstep unit. Haven't made any contact yet. Here are a couple of pics, one with step up, 2ed with step down (11.5 inches of ground clearance with step down).|
|07-31-2013 09:57 PM|
|Comstock||No I didn't do the entire Fordyce trail.|
|05-16-2013 04:57 PM|
|caryt||You did the complete Fordyce trail and never touched a rock...|
|05-16-2013 12:19 AM|
|BacaraJKU||Awesome, I figured they wouldn't create clearance problems, just can't be used in place of sliders.|
|05-15-2013 09:55 PM|
|Comstock||On the start of the Fordyce trail near Like Tahoe last weekend. The steps have pretty good clearance. I chose my lines well and didn't make contact once with rocks. Another pic of clearance playing near my home in Nevada.|
|05-14-2013 08:52 AM|
|05-14-2013 08:38 AM|
I wouldn't get the Amp steps unless you just stay on the road, off road any get R-SE steps. They will take hits...I used them as pivot points against rocks last trip, no damage except to the paint.
Rock Slide Engineering Online Store
|05-14-2013 01:11 AM|
|05-14-2013 12:08 AM|
I have the amp steps on my 2013 jku with a 4 inch lift and 35 inch tires. I bought my jku with a dealer installed lift and the amp steps. I wouldn't have bought them aftermarket but I do love them. They work exceptionally well. I had a few issues last winter when they would get heavily iced up and not close completely. I think they have loosened up with use and haven't experienced any issues since. I am used to the servo motor sound when I open my doors. On several occasions I have got out of the jeep and looked up to notice people staring in amazement at their function and questioning me on them.
Probably not the thing for serious rock crawling but awesome for daily use. I wold recommend them. I will try and post a pic of my keep with them.
|05-13-2013 11:49 PM|
|Sgt93||The AMP steps are fantastic. If you can swing the price, go for it. You will love them.|
|05-13-2013 11:45 PM|
|MillerWelds87||I have them on my F150 and love them. I like how they tuck away and pop out when i open my door. Everyone that opens their doors go "WOW" thats cool. No problems with sand or grit from stopping them from swinging up and down. I am going to pass on these on my JK and get some ace sliders though. Either way you go it will be great!|
|05-13-2013 11:45 PM|
I'm not worried about protection because I hope to never be in the situation of using them as sliders. If I did damage either option, I'm the kind of person who would replace the damaged part.
I'm just concerned with how usable a single saddle type step is vs a bench style step. I've been looking at pics of nerf vs powersteps and both look like enough drop to be usable in height.
|05-13-2013 11:28 PM|
I had the AMP steps on my 11 F250 with 4.5" lift. Never had an issue with them opening or closing in any condition (Midwest). Loved them. My then 4yo could crawl in and out on his own. They were worth the money and have clean lines (which was nice on a truck).
On the other hand, with the Jeep you can have more of a dual purpose with tubes (protection) etc. It all comes down to what you want to spend, and what you want for looks/protection. Best of luck.
|05-13-2013 10:35 PM|
Power Steps vs Nerf Steps
I thought I was decided on Amp Powersteps, but now I'm looking at the N-Fab Nerf Steps.
Right now I have flat steps the look more like the factory rubi sliders, but stick out e ought to use as a very high step. My girl and young kids struggle to get in. I need to do something and the powersteps look to be perfect in terms of height.
- Good step height and fold away when not needed, but I'm concerned with sand, etc getting into joints and binding up down the road. To keep sand from spraying up, I will be forced to put mud flaps on. I know many don't like these, but I don't mind so this isn't a factor.
- no moving parts and I think they look good in the satin black. My concern here is if its too high to be useful.
The most I'm lifting would be 2" and 33's. Looking for input