|05-17-2013 04:32 PM|
|05-17-2013 04:26 PM|
Poly Performance JEEP/TRUCK & BUGGY*::*Fabrication Parts*::*Axle & Chassis Brackets - 4X4 Off-Road Parts
Just a few sites where you should be able to find what you need
|05-17-2013 04:23 PM|
Ya it is front and rear photos 3456 thanks-- I wonder if someone makes a weld on bracket?
I might just have the Jonny joints welded on and cut the Rough country arms (like unlimited recommended) this is becoming more trouble than I have time for
Thanks for all your help
|05-17-2013 01:55 PM|
|05-17-2013 01:53 PM|
does the long arm kit from RC require cutting off the stock short arm mounts?
if so, just bolting on the 4" currie kit wont work....
|05-17-2013 01:40 PM|
I have heard lots of good things about the currie kits.
|05-17-2013 01:37 PM|
|Rubicon1968||Thanks I guess it will be the currie short arm as I mistakenly was reading about the full traction LA when I posted..|
|05-17-2013 12:30 PM|
|05-17-2013 12:25 PM|
|Rubicon1968||Thank you for your responses-I am going to go with the complete currie set up 4"LA-. Iwill rebuild my RC control arms and sell it with the new 5100's on ebay- Hopefully I can get $750 out of the kit with adjustable front and rear track bars springs etc.. Thanks again|
|05-16-2013 04:34 PM|
|Cons_Table||Assuming you can weld, you could probably knock it out easily in a weekend. If you cant, itll set you back a little time.|
|05-16-2013 04:32 PM|
|Rubicon1968||I like the several hundred better than the $1200 its the down time that will kill me..|
|05-16-2013 04:17 PM|
all that added up, Currie JJ's on all ends, will cost several hundred bucks.
|05-16-2013 03:36 PM|
|05-16-2013 03:30 PM|
|05-16-2013 03:17 PM|
|05-16-2013 02:54 PM|
|Rubicon1968||I have the long arm kit- Only rebuilt twice so far in two and a half years but its like every year and I don't like it with only 22,000 on the lift 30,000 on the LJ wrangler|
|05-16-2013 02:06 PM|
|Cons_Table||Do you have the long arm kit or the short arm kit?|
|05-16-2013 01:56 PM|
|Jaxon1023||How long have you had the rc lift? Do you do a lot of wheeling? Just wondering why you've had to rebuild them so much.|
|05-16-2013 01:49 PM|
|Rubicon1968||Oh the shock are awesome compared to 2.2 RC|
|05-16-2013 01:48 PM|
|Rubicon1968||4wd place is telling me there will be different mounting points so if I scrap the entire Rc kit except the springs (just spents $400 on Bilstein shocks for 5.5-6" lift) I should be able to do it. Now I need a price..???..|
|05-16-2013 10:58 AM|
Can I put the Currie control arms on my 6" rc lift??
I have had it with rebuilding this X-flex RC control arm and just want to be done with it and do a Jonny-joint set up with Currie. I read a lot on this forum and they seem to be on the top of the list with the least amount of problems.
So can I just buy the control arms and bolt them in where my current Rough country control arms are currently bolted. I want to do the install myself and not pay a forture to have them put on. Thanks
I'm a little concerned about the front housing area again 6" RC lift.. Thanks
Any part numbers or a site vendor for help would be even better..