|10-23-2013 07:25 AM|
Thx everybody finally I done it,
Re gearing 4.88, detroid locker, JK Axle Sleeve and Gusset Kit teraflex, method race wheel, 35 inch atturo blade MT,vivid linq ( I bought the part, mechanic installed it) . I luv it.
|05-19-2013 09:34 AM|
|charlie8||Thx a lot. I'll ask couple mechanic and search good deal for part. I'll post after I done it .|
|05-17-2013 11:24 AM|
|05-17-2013 09:12 AM|
|stzd8||I apologize to barge in, but I am running stock on rubicon 4:10 with 245/75/17. If I get like 285/70/17 will I need to regear it? It has auto transmission, rockhard front bumper, ace rock sliders.|
|05-17-2013 09:07 AM|
|05-17-2013 08:05 AM|
|rics1997||Personally I disagree with going with 5.13 unless you plan on 37's. I have 4.88's with 35's and think they are great. I had 33's on 4.88 and hated it because it was too low for hwy driving which will be about the same as 35's on 5.13's. Now if it is mainly an off road vehicle then 5.13's will be great but if it is a DD I would stay with 4.88 with 35's. Since you need new carriers anyways, I would highly consider lockers.|
|05-17-2013 08:04 AM|
Are you planing on doing it yourself? (I honestly don't see anyone who dosent know what they need having the tools or knowledge to get a R&P set up close enough to run on the street)
If not lots of shops will give you a warranty if you buy the parts from them.
Depending on how many miles you have on it you will need either a master install kit (has all new bearings in it) or an minimum install kit. Yes you will need a new carrier if your stock ratio is 3:21. And of course you will also need a R&P set.
|05-17-2013 07:54 AM|
|05-17-2013 07:53 AM|
A) I would suggest 5.13's over 4.88's. I went with Yukons.
B) Coming from 3.21's you will need new carriers.
C) I would have a shop do it. I am quite handy with a wrench but would touch a job like this on my own.
|05-17-2013 07:52 AM|
welcome to the forum Charlie.
yes you need the ring and pinion. look for G2 (what I have), superior, or Yukon. you definitely will need a carrier because of the 3.21, and an overhaul kit.
if you have ever kicked around a locker, now's that time also. some good package deals to be had out there.
good luck. let us know what you decide.
|05-17-2013 07:46 AM|
re gearing 4.88 what do i need
Hello, my name Charlie. I'm new in here.
I want advice for re gearing jk 08 non Rubicon 3.21,manual . My 35 tires on the way. I hear I should change 4.88 ,is that true? What do I need to order pinion and ring 4.88 and overhaul kit? Do I need order new carrier for 4.88?is that correct? Because I heard gear 3.21 different carrier with 4.88.
And also vivid linq is that good? Thx a lot