|05-17-2013 07:21 PM|
|Rbmaurer9||4X4groupbuy.com for $466. Its an advanced adapted SYE and Tom Woods driveshaft. Been working a lot so I paid my local 4WD shop 4hrs labor ($200). Was worth every penny|
|05-17-2013 01:56 PM|
|Black Magic Brakes|
|05-17-2013 12:26 PM|
|All Terrain JK|
|05-17-2013 11:29 AM|
|05-17-2013 11:26 AM|
|05-17-2013 10:42 AM|
|05-17-2013 10:28 AM|
Has anyone used JB Conversions SYE kit? Loos good and prices start at $299.00 with the CV Joint.
|05-17-2013 12:53 AM|
|Black Magic Brakes||
You will get a new Teraflex heavy duty SYE kit and my 1310 CV drive shaft. Eliminates drive train vibrations on lifted jeeps when properly adjusted. This is a complete kit with instructions. All SYE kits and drive shafts are not created equally. Watch out for the cheap junk that others sell. I only use top of the line parts in my drive shafts. Spicer u-joints, full contact 7" slip and spline, greaseable CV and u-joints. We spin balance to over 100 miles an hour. I will need a measurement to build the correct length of CV drive shaft. Pictured are the dimensions I need. From the back of the transfer case to the center of the u-joint cap on the diff yoke. For tech help call Curtis. 1-801-685-0056 or email me. This kit is built to the highest quality for years of 4x4 adventures. My drive shafts are competition proven, trail tested, and built show quality.
Not perfect by any means, but at least it no longer looks like it was text-ed by an illiterate 16 year old driving dad's car on the freeway.
|05-17-2013 12:45 AM|
|IslandTJ||When you call, you'll probably talk with Chris - he was very helpful and informative. I would definitely purchase another Tatton's product if need be.|
|05-17-2013 12:42 AM|
|05-17-2013 12:27 AM|
|05-17-2013 12:22 AM|
|05-17-2013 12:19 AM|
|05-17-2013 12:15 AM|
|05-17-2013 12:01 AM|
Check this guy out too. Jeep SYE Kit YJ TJ XJ Wrangler Jeep CV Driveshaft 231J | eBay
I ran his setup on my YJ and will probably do the same on my TJ to get rid of the hack and tap the PO had installed.
|05-17-2013 12:01 AM|
|98 tj sport|
|05-16-2013 11:58 PM|
|98 tj sport||Just call up tom woods directly his website is 4xshaft.com or something like that, u can google it, get on there and it shows u how to measure for ur shaft, and such, when u call ask to speak to tom directly he is very helpful, I told him that I was sent his way by a forum member(jerry b) and he was very helpful, I told him my lift and he actully knew what it measured before I told him,yes u will need adj arms, I haven't got any yet cause I am short on cash so I have a custon skid drop in right now, my main reason for the sye and shaft was cuz I changed rearends and my stock shaft was to long, but the arms to have according to everyone on here are savvys with johnny joints at both ends,|
|05-16-2013 11:56 PM|
|DANGItsVictor||TOM WOODS web site has like 6 different setups.... How do I know which one to go with!!??|
|05-16-2013 11:50 PM|
|DANGItsVictor||Oh, and I am in Colorado Springs, CO|
|05-16-2013 11:49 PM|
|05-16-2013 11:43 PM|
|Jaminjer||I just did mine myself, nice to learn more about the jeep and what goes where. Lots of info in here, lots of youtube vids showing how also. I only pulled back half of case out, i think if i had to do it again i would pull whole transfer case. I think I have about $500 or so in sye and driveshaft.|
|05-16-2013 11:38 PM|
|98 tj sport||I got my tom woods and advance adapters sye for 535 to my door, and me and my father in law put it in, its not hard at all just have to pull the tcase, then take it apart and put it back together, my sye had very detailed instructions, and there is no was in he!! I would pay that much, I think it took us a total of may 2 maybe 3 hrs but that's pushing it and that's draining and removing tcase, taking it apart changing the shaft, reinstalling tcase, and refilling it, and we weren't rushing that's working at a lesiurly pace. O and I'm sure u can find some local people on here to help u out, were u located at|
|05-16-2013 11:10 PM|
Questions about SYE kits and prices
Hey everyone, I am trying to do an SYE and I am wondering what people have paid for parts and labor. I got quoted at 1150$ by a local 4x4 shop and walked out quickly after hearing that price. I can buy the kit online WITH a drive shaft for 540$.. Is it hard to do yourself? Would you pay the 1150 to have someone else do it?