|05-24-2009 04:30 PM|
I went ahead an bought the Jeep. AND NOW my name fits me on the forum now. =]
I'll post pictures at some point,
|05-23-2009 10:30 PM|
|namsnik||This is my first jeep (99 TJ) and I was surprised how stiff the clutch wasAnyone know what the plate the actual pedal bolts to the hole on mine seems worn out. all the sudden there was a lot of slop in the pedal.(didnt wanna start a new thread for this )|
|05-23-2009 05:47 PM|
If it seems to be operating properly, then maybe you just need to get used to the jeep. Like you said you went from driving a little jetta to more rugged built jeep.
I borrowed a VW rabbit for a few days when my jeep was down and the first time I pushed down on the clutch I almost kicked my foot through the floor. Very different.
Have a mechanic or tranny shop take it for a spin and see what they think.
|05-23-2009 03:48 PM|
The Pedal was about 2 to 3 inches for the engage to disengage. Also, the pedal squeaked when I became laid back (slowed down on throttle to clutch pedal and vice versa) and used to the clutch (well sorta used to it).
I'm used to a non-hydraulic clutch, 94 VW Jetta (Don't Bash me, =]).
http://www.lemonfree.com/35454837.html Here is a link to the Jeep
|05-23-2009 03:35 PM|
It could be a number of things; the hydraulics are my main guess, either the master or slave cylinder could have a problem, or maybe the pressure plate is... just that stiff.
Where about on the pedal range does the clutch begin to engage/disengage? Is this your first Jeep? Jeeps are typically a little bit stiffer than most recent cars if thats what you're used to
|05-23-2009 03:33 PM|
98 TJ CLUTCH (need answer :])
This clutch had not been replaced to their records but this clutch was EXTREMELY stiff!!!! I couldn't tell if it was new, used, or nearly dead.
I do know what a terrible clutch is like. ( slipping gears when giving the car gas ). This jeep, however, was not bad at all just extra extra stiff! Let me know what you all think.