|05-21-2013 05:15 PM|
|05-21-2013 05:10 PM|
take it on a minor trail and it will remove itself.
or back up in mud
|05-21-2013 11:21 AM|
|Mody n Domy||I took mine off and put on the Currie tow plate and I'm getting 20 mpg don't think it makes much of a difference.|
|05-21-2013 11:13 AM|
|05-21-2013 11:10 AM|
|OurJeepLife||Thanks for the comments and suggestions.. Thou I'm more in the lines of watching our fuel consumption.. if removing this plastic gaurd increases our fuel cost.. then it's best that I leave it on..|
|05-20-2013 10:46 AM|
|jamjoy||i agree.Then just pull on the screw and it will pop right out. No damage and reusable if needed|
|05-20-2013 10:27 AM|
If we're talking about the air dam, the trick to removing the plastic pop rivets is to screw a screw a little bit into the top center of the rivit.
Then just pull on the screw and it will pop right out. No damage and reusable if needed b
|05-20-2013 10:11 AM|
|OurJeepLife||@legitposter: This is one issue/factor I need to concider.. Having done soem mods to the front end (wheel well area) I wasn't pleased with the down force/nose diving I was getting with a home made air dam system.. I'll have to reconcider leaving it on for now..|
|05-19-2013 02:00 PM|
|jadmt||just give them a squirt of wd40 and they pop right out. I have had mine off and on several times and never had any issues with the plastic rivets getting ruined.|
|05-19-2013 01:56 PM|
|legitposter||If you drive 45+, you'll have a noticeable drop in mpg after removing this ugly piece. Just consider the trade-off before proceeding, I guess.|
|05-19-2013 01:46 PM|
They can be difficult if you dont have a sharp screwdriver
The first one came off easy, the next one was stripped within 5 seconds. I took a drill to the rest of them. drilled straight through them and ripped off the plastic nut. Took 5 min for everything
|05-19-2013 01:45 PM|
|AndrewKlein||Not too hard, but factory fasteners probably destroyed in process. I replaced the front bumper twice and devised my own replacements out of nylon nuts, bolts, and washers.|
|05-19-2013 01:40 PM|
Rock Guard Removal?.
I was wondering if its really easy for someone like myself (some what hindered) to remove the plastic rock guard from the front of the jeep wrangler?.. (located right under the front bumper)
I see it as an eye sore more then serving any purpose.. thoughts?.. worth removing?.