|05-28-2013 06:54 PM|
I guess I need new lug nuts too since wheels are black and lugs will show?
1/2 x 20 thread size?
Sorry for all the questions, just want to make sure I get it right.
|05-26-2013 12:40 AM|
|chrispjeeper||IT is because of your lug pattern or the offset.|
|05-25-2013 09:38 AM|
As far as overall height, the size I suggested earlier is the same height and width as the other size you were looking at. So there would be no loss. Both sizes are a touch larger than stock
|05-25-2013 08:53 AM|
Would it be cheaper in long run to go with the 17 inch? Are 17 inch tires considerably cheaper? Are 17s more the norm?
How much overall height would i give up?
|05-24-2013 11:12 PM|
to fit those exact tires, yes, you would need an 18 inch wheel.
however, if you want that 17 inch wheel, you can go with a tire that is sized at 285/70 R17
that is the same overall size as what you were looking at with the 18s
|05-24-2013 10:43 PM|
on the amazon site I a looking to order the moto metal wjeels it says I need to order
Moto Metal Series MO951 Gloss Black Machined Wheel (17x9"/5x5")
but my tires are:
BF Goodrich LT 285/65 R 18
so wouldnt I need a 18 inch wheel?
|05-21-2013 01:09 PM|
|dawhitesJKU||our bolt pattern is 5x5 or 5x127|
|05-21-2013 12:58 PM|
Please help with Wheels for 09 JK
I currently have factory wheels on my 2009 JK Sahara. My tires are BF Goodrich LT 285/65 R 18
I have a rough country lift to raise it just a little but not too much.
I want new wheels and use the same tires as they are like new.
I am looking at the
Moto Metal Series MO951 Gloss Black Machined Wheel (18x9"/6x5.5")
But it says on the online order form they will not fit but not why. Bolt pattern? something else?
Could someone make some suggestions for a wheel similar and also help me figure out what exactly i need to order to fit?