|05-29-2013 11:27 AM|
|05-28-2013 04:01 PM|
T176 sticks in 4th after rebuild
OK folks - time to call upon the wisdom I know you all have out there -
T176 jammed on the way home from church one day. Tore the top cover off and saw a bent syncro slider on the 3-4th syncro ring. See Pic
I dissasembled and used a novar rebuild kit to rebuild - went nice and smooth - no major problems.
1st and 2nd work great - will shift into 3rd, but the problem occurs when i shift into 4th - The ring will jam, and I will have to grab the cluster and push all three of the sliders in, in order to slide the ring back to neutral. It seems as if the shifter is sliding it too far, but there is no play in the shifter, and the forks look alright...
PICK STUCK IN FOURTH
I dont know if it need to break in a little bit, or if this is happening because i am dry shifting with no fluid? or if my slider ring is shot? Everything with the shifter linkage looks good.
Any help or wisdom - jeep voodoo you can send my way much appreciated.