|06-12-2013 02:29 PM|
Look under the fog light you bolt a 5" x 1.5" bracket to the bumper the other end is for the flag...buy the foam for the base of the flag.
You can buy it all at the local shops.
Remember to air down to about 12 psi.
|06-04-2013 10:36 AM|
|jeff_in_rc||If you go to a motorcycle/quad shop look for a product called, IIRC, Sand Nutz. It is a spring loaded device for holding the flag. You mount it to your vehicle and then insert the flag into the mount and your done. Then just remove the flag at the end of the day.|
|06-03-2013 07:31 PM|
1/2" hole, they can mount it for you too if you want. for my truck they just bolted on a short piece of angle iron
my buddy I went with had a pristine truck he didn't want them drilling into, so they had some sort of mount they bolted onto his bumper he could take off when done.
|06-03-2013 07:21 PM|
Silver Lake Michigan Dunes Flag
I am going to Silver Lake Michigan to Play on the Dunes for the 4th of July week . And I have never been there before. I read the rules about having a 10 foot flag mounted on the front of My JK. Every one says I purchase the Flag up there . Can anyone tell me what size hole to have ready to mount this flag ? I just do not want to take all kinds of tools to fabricate this flag mount.