|06-10-2013 12:08 PM|
|indirocz28||Eventually I will. Working on updating the mechanical aspects of the jeep first. Radio is far far at the bottom of my list for about any vehicle. lol|
|06-10-2013 10:53 AM|
|06-10-2013 09:55 AM|
|indirocz28||I'm good at that last part. And drinking beer.|
|06-10-2013 09:11 AM|
|06-05-2013 06:22 PM|
It's a good way to get to know the dash and all the wiring behind it as well as the removal and replacement. It is a royal PITA. However it is a good opportunity to repair anything behind the dash that might need it, as well as replace the windshield cowl seal.
I did mine and decinded to take apaprt everything and repaint, went from tan to black and am very happy with the results..
This is NOT a 3 hour project, don't underestimate the pain of a Jeep.
|06-05-2013 06:35 AM|
I want to do all new speakers, and put in a radio into my YJ, but you guys just made me decide to put it off for a while. LOL
I would prefer and recommend a marine type speaker for the Wranglers as it tends to get wet, and sometimes muddy inside, and its great to be able to just hose it all off.
|06-05-2013 06:26 AM|
|06-04-2013 12:00 PM|
I just did mine. Did a pair of Alpine coaxials up front. Not much fun to get your hand in there, but my windshield hinges are frozen so I couldn't drop the windshield. Passenger side is easy, especially if you pull the glove box. Driver side is more difficult, pull the emergency brake assembly and take the three screws out that are to the left of the speaker. That will allow you to flex the dash out a bit.
Because I put coaxials in I needed to space the speaker back from the dash a bit. So I put a set of nuts on the dash studs and left them about a 1/2" from the dash. Then I put in the speakers and then the nuts to hold the speakers in. This stopped the highs from rubbing on the back of the dash.
|06-04-2013 11:21 AM|
|reno92||I replaced my fronts with the Polk marine 4x6 speakers. The holes did not line up with my YJ studs. I figured out that by laying the old speaker on top of the Polk and drilling out holes to match my studs it lined up and went on perfect. I did need to add some foam spacers because the Polk tweeter is not flush with the front of the speaker, it sits out a little.|
|06-02-2013 09:41 AM|
|05-05-2013 02:29 AM|
|Grizzlycb||Iv also had three different after market radios in there it came with one that didn't work half the time so I replaced it with an extra I had around the house and then I wanted a aux cord outlet so I did some bartering with a couple buddy's and put the one I have in there now in. Like said before its probably the back ledge all I did was get a long flat head screw driver and managed to get it down or push it back up.|
|05-05-2013 02:25 AM|
Here. Is this from a previous thread about replacing dash speakers id send the whole link if I wasn't on my phone app.
|05-04-2013 10:11 PM|
|05-04-2013 07:16 AM|
|04-24-2013 12:56 PM|
|04-24-2013 12:52 PM|
|KentuckyMike||I got factory dash speakers(As I haven't gotten into tearing the dash apart yet, to change them). I have a factory overhead sound bar That I put 5.25 inch Yamaha speakers in. Got lucky and the Jeep came with a Pioneer Supertuner(50 watts per channel)CD, MP3, WMA, USB and one wire hook up. The USB is great, put my music on a 8gb flash drive and never once heard it skip while off-roading or hitting bumps on the road. I then had a sub box w/2-12" Memphis Subs and 1100 watt Amp from my old S10 Extended cab, so I installed it in the Jeep, after removing the back seat( I am divorced and my son is 24 yrs. old, so no need for the back seat anymore). I have had many different sound systems over the 31 years of owning and driving vehicles, and none of them sound as good as this one does, in or out of the Jeep. Its as loud as I could ever want, Feel every stroke of the bass, but its not obnoxious sounding and vibrating every loose peice of metal in my Jeep. Couldn't be happier, except replacing the Dash Speakers.|
|04-24-2013 10:41 AM|
Would like to see the audio systems people have.
I have a Sony explode headunit. Replaced stock dash 4x6" with coaxle. Installed 4" coaxle in each door. 2 6x9 triaxle in custom soundboxes in rear. Sound boxes are mounted with special bracket w/wing nuts to easily remove when needed.(no amps or subs)
|04-24-2013 09:27 AM|
|04-24-2013 09:11 AM|
|KentuckyMike||Stock sound bars are 4 inch or 5 inch typically.|
|04-24-2013 09:10 AM|
|KentuckyMike||Front dash speakers are 4x6.|
|04-24-2013 09:05 AM|
What size speakers?
What size speakers are in my YJ? I dont have a sound bar, just the front ones. I am on crutchfield trying to figure it out but they say it can take 4", 5 1/4" or 6". That cant be right...