|06-09-2009 11:41 AM|
|06-08-2009 01:45 AM|
|Joshpfeffer||I use my body weight to pull the rear corners down. Just grab either side of the corners (^^^ After latching header panel) and lean back a little. It's no problem at all. Then I zip the windows in, and then tuck in the front and bottoms. For that front edge, I always start with the top too, not the middle.|
|06-07-2009 05:25 PM|
|n8smitty||I agree except I just hook the front latches I don't close them down. It give a little more room to work with on hooking the back sail flaps. I almost ripped the bottom out of one of the sail panels on my old top. The stitching started to come loose from pulling on it. Just something I do when I attach it.|
|06-07-2009 11:06 AM|
|orange05tj||I leave the back window rolled up when the top is down, makes it easier. X2 on the locking the front down first.|
|06-07-2009 10:49 AM|
|B86W05||on the back side windows i start the zipper zip it about a inch or so then tuck the window in place and finish zipping|
|06-06-2009 10:11 PM|
|ab8140||Do you guys zip up the back side windows first or tuck them in first?|
|06-06-2009 10:09 PM|
|06-06-2009 09:43 PM|
|Jerry Bransford||The biggest effort saver I'll offer is to attach the header to the windshield before attaching the soft top's rear corner pieces to the tub. Many try to attach the rear corners first which means you won't be able to get the header close enough to the windshield to latch it. The rear corners stretch so you can push them downward into place pretty easily with the front header latched. Position the top's edges around the door jambs just before you pull the clamps down into their clamped position.|
|06-06-2009 09:25 PM|
putting top back up...
Taking the top is very simple... but does anyone have a step by step of the easiest way to put the top back up correctly??
i know its a noob question!!