|06-11-2013 12:25 PM|
|indirocz28||+1 for the champion radiators.|
|06-11-2013 11:56 AM|
|87YJnTX||I have the serpentine...... no shroud on it right now. not my DD til I get everything right. it would fit except for those little tabs which point forward......may grind them off and get her in there that way.|
|06-11-2013 06:40 AM|
|Fabrokoner||You have the v belt set up or serpentine? I'm a v belt.|
|06-11-2013 06:39 AM|
|Fabrokoner||Yeah I have a 1990 4.2. Hmmm. My engine had been lowered or something. If you look at the pic of the radiator installed you can see the radiator hangs from some 3" or so brackets. Maybe that made the difference. Did you attach the shroud to the radiator before you put it in? There isn't enough room for that. You gotta drop in the shroud and fan at the same time. Not really sure...|
|06-11-2013 01:24 AM|
|87YJnTX||ps I have the 4.2|
|06-11-2013 01:23 AM|
|87YJnTX||I did pull the fan to install radiator.....the front of the fan hits the radiator when installed. Maybe you have aftermarket fan ? mines stock as far as I know|
|06-10-2013 09:55 PM|
|06-10-2013 08:39 PM|
|87YJnTX||my 3 row would not fit with the fan on......wonder why. It is a champion also...|
|06-10-2013 07:05 PM|
|reno92||Very nice! I have Champion bookmarked. Are the tranny cooler holes plugged or open? I like the 3 row but don't have an auto so don't need the tranny cooler.|
|06-10-2013 06:50 PM|
I just installed a Champion 3-row core all aluminum radiator yesterday. Made an almost 15 degree difference in operating temp. Well... maybe the new water pump, thermostat and flush and fill helped a bit. She sure is shiny, love it so far. $210 shipped on fleabay, as you can see ithas the tranny cooler (which I need).
|06-10-2013 05:44 PM|
|Jasonk93yj||Got one comin tomorrow. 150$ with the water temp sensor. Local napa|
|06-10-2013 09:46 AM|
|06-10-2013 01:18 AM|
I think all together is was 138 shipped
Shipping took like a week and a half
Radiator looks very nice a pretty. Good clean welds. Works great and bolted up very nicely.
Didn't come with a cap, or a tranny cooler, but my jeep is a 5 speed so I didn't need that anyway.
A tip when replacing it, take the fan out first, it will make getting to the hoses and bolts a hell of a lot easier.
If you have any question feel free to shoot me a pm
|06-10-2013 12:57 AM|
|Jeep_Gypsy||Cole where'd you get it?|
|06-10-2013 12:53 AM|
|Cole Noah||I payed 140 for mine. It's all aluminum|
|06-10-2013 12:45 AM|
|reno92||I'd go aluminum, they run about $180+- on Ebay and Amazon|
|06-10-2013 12:37 AM|
|Jeep_Gypsy||I got mine for about a hundred. But it was from a junkyard.|
|06-10-2013 12:24 AM|
How much $ should I expect to pay for a radiator for a 93 4.0?