|06-21-2013 06:38 PM|
|Purdue11||Just came across this thread. Here are some pics of my bedliner. I used monstaliner. I ordered the 1 gallon kit in medium quartz. It is really easy to apply (the prep is the hardest part) and is a great outcome. Also, monstaliner gives great instructions with the kit as well. I ordered a mini roller too, to get into smaller areas. It is a really easy DIY project and makes your jeep look way better. Before mine was white with a little surface rust. Now looks pretty new.|
|06-12-2013 09:54 AM|
Jazzman, I did a writeup on my Monstaliner install here on the forum. It may help you with your prep work.
I've had it in for 3 years now and it is still looking great! Textured, but not abrasive. If you have questions, please feel free to ask. Good luck with whatever option select!
|06-12-2013 05:21 AM|
|jazzman||Thank you all for your input on bedlliner paint.|
|06-11-2013 03:22 AM|
Bed Liner Paint, Do It Yourself Bed Liner, Roll On Bed Liner
Available textured, or not, and in several colors.
|06-11-2013 01:03 AM|
|Wondertwin1||Line-x is about $1400 to color match the tan interior for me. Little bit expensive. I'm looking for alternatives.|
|06-11-2013 12:40 AM|
|Kota7x||I used Raptor Liner. Comes with its own spray gun that you connect to your compressor and after prepping, just spray it on. I went with the spray route because you can turn up/down the pressure to get the texture you like.|
|06-10-2013 07:43 PM|
|TJspeed||I'd go with Line-X!|
|06-10-2013 06:01 PM|
|jazzman||Thanks a lot for the advice and photo! I too will go with monster liner thank you|
|06-10-2013 02:34 PM|
|Slayfishsota||i plan on doing this sometime over the weekend. just bought a 2001 tj black with a hardtop that's looking a little faded and I was thinking about spraying it with line-x also. anyone else do that by chance?|
|06-10-2013 02:27 PM|
|06-10-2013 01:49 PM|
For roll on application, I would go with Monstaliner. Comes in different colors, less abrasive than Herculiner, and UV protection.
|06-09-2013 06:52 PM|
|jazzman||thank you so much for the information I'll make my decision soon!!|
|06-09-2013 06:45 PM|
I used Herc in my YJ and used their roller. It was easy to apply, but over time I started to hate because of how rough it was. I go to Pismo and Glamis all the time and go bare foot and would sctrach my feet up and knees. Also the sand was impossible to get out because it would get stuck. I probably could of done something about at the beginning but it did it's job.
I used Raptor and along with their spray gun on my TJ and made it easier to adjust and not make it so rough.
|06-09-2013 06:43 PM|
|JCizzle||I just did mine today. I used U-Pol Raptor Liner with a spray gun and it was super easy. Prep is 95% of the work.|
|06-09-2013 06:27 PM|
Do some searches. Monstaliner, Raptor liner...
Lots of information already discussed.
|06-09-2013 06:17 PM|
do it to self bed liner inside the Jeep
hi Jeep fans just wondering has anyone painted their own bed liner inside their jeep using a paint brush and roller. Using a product called Herculiner and is it worth doing it? I want to get rid of the carpet in my Jeep.