|06-12-2013 08:50 PM|
|06-12-2013 06:31 PM|
|06-12-2013 06:02 PM|
|06-12-2013 05:49 PM|
|06-12-2013 05:44 PM|
|931JK||Thanks a lot. I'm gonna go ahead and order these before I get the leveling kit put on. Do the 1601277 brackets weld on?|
|06-12-2013 05:33 PM|
|TeraFlex||You can indeed just get the pics the part numbers you will need to make a kit are as follows. 1943705 x 2, 1601277|
|06-12-2013 04:03 PM|
|legitposter||Do you need brake line extensions to operate disconnected?|
|06-12-2013 03:47 PM|
|06-12-2013 03:40 PM|
|931JK||I ordered the teraflex leveling kit and it comes with the sway bar links. Can I just get the teraflex quick disconnect pins to go with it?|
|06-12-2013 03:36 PM|
|06-12-2013 03:25 PM|
|931JK||Sorry for the newb questions,I'm trying to learn as I go. I just went and took one side off and I just learned that I won't be doing that again until I get some quick disconnects, it would suck hooking them back up with mud everywhere.|
|06-12-2013 03:21 PM|
Now all I do is pull a couple of pins on either side and the link comes out completely. If I need to in the future I'll tie the swaybar to the frame to keep it from drooping.
|06-12-2013 03:08 PM|
|931JK||So I could just undo it and tie it back to the sway bar as long as it doesn't rub?|
|06-12-2013 09:13 AM|
|06-12-2013 08:20 AM|
|Andy 1965||@Jeepdon, so just pull the pins and relocate? Nothing under tension? Also, thanks for the pics.|
|06-12-2013 07:59 AM|
This way, nothing is going to rub and rip your sidewall!! Good luck!!
|06-12-2013 07:13 AM|
you have to look kind of close to see mine
|06-11-2013 10:11 PM|
It is tied off to the front cross frame
|06-11-2013 01:02 PM|
|931JK||And thats why I love this forum. Thanks derf|
|06-11-2013 12:56 PM|
You can see in this flex shot the duct tape I wrapped around the folded up links. There's enough tension in the bushings that the bar stayed up the whole day without any support.
I just added a lift kit with JKS quicker disconnects so when I disconnect in the future the links come off after removing a couple of pins. If the bar starts to sag I'll worry about finding a way to hold it up.
|06-11-2013 12:52 PM|
picture of sway bars undone please
I am gonna undo my sway bars for a trip offroad saturday and I was hoping that someone could post a picture of theres undone so I could get a idea of how your tieing them up. Any help is greatly appreciated.