|06-14-2009 08:04 PM|
No more edit, I guess it took too long. Heres todays pics
I gave it some thought and decided to go with a 1" body lift. Its cheap enough and easier to do it when my jeep is like this. Any recommendations?
|06-14-2009 07:31 PM|
I installed the front of the lift kit today. I also cut the steering shaft mount off. I would have cut the motor mounts, but I was on my last sawzall blade and it was pretty much shot. I will borrow a grinder from work to smooth out the frame and then paint it over with undercoat so there is no evidence of the mounts.
pics to come shortly, when my girl uploads from her phone
|06-11-2009 04:53 PM|
pictures thus far
In the second picture, it looks like the toe is way out. Probably from my girls cell camera. I hope to have the motor mounts cut out this weekend and I will install the SYE on the transfercase also. I still need the wire harness for the 4.0. I won the bid on ebay, but the seller flaked out saying it was stolen. Whatever, I'm in no rush.
|06-10-2009 07:58 AM|
|06-10-2009 07:38 AM|
|06-10-2009 05:05 AM|
|whitebomber||Welcome from a fellow NY'er. Sounds like you have your evenings booked for awhile|
|06-10-2009 04:43 AM|
|jeepnpr||Welcome from Springfield VA|
|06-10-2009 02:55 AM|
|RatherBNarizona||Welcome to WF!|
|06-09-2009 11:59 PM|
|orange05tj||Welcome from Orange County, NY|
|06-09-2009 10:50 PM|
|john's ct jeep||welcome to the forum|
|06-09-2009 08:32 PM|
|06-09-2009 08:27 PM|
|jpdocdave||welcome....pics are mandatory|
|06-09-2009 08:16 PM|
East coast newbie
Whats up all! I'm from suffolk county NY. I have a 97 wrangler that was a DD and turned into a project as my 2.5 retired on me. So far I have a lockrite locker in the front dif and MTRs on stock steel. I have a 4.0 swap I am in the process of installing(yes I know whats involved). I owned 2 yjs before I bought this one and both were 4cyl. Since I have another vehicle to commute with, I plan to work on my TJ for the next month or two to get it up to snuff. At the same time I will be installing a Fabtech 4" lift.