|06-10-2009 09:31 PM|
|tazmann910||Thanks guys for the feedback. I got a set of Teraflex arms.|
|06-10-2009 07:52 PM|
For what it's worth, my front LCA are at 16" exactly for a 2.5" OME lift with 3/4" front spacers. There are charts for this floating around the net.
|06-10-2009 07:02 PM|
|4Jeepn||Who makes the arms? I would check there site and see if they have any install instructions for your lift height, and see what they say to set them too.|
|06-10-2009 01:12 AM|
|1BLKJP||It's hard to say without seeing what your pinion angle is at now. My suggestion would be to set them to stock length and then run them out about 3 turns to start. Install, set on the ground under full weight and see what you think.|
|06-09-2009 10:31 PM|
Adjustable Control Arms
I just got some adjustable lower control arms and I am wondering what is the best length to set them to for a jeep that has a 3" suspension lift. I want to make sure my pinion angle improves a bit.
Thanks for any advice in advance.