|04-07-2014 11:18 AM|
So update, it snowed on the day we planned to do the bearing change so I have not managed to get that done yet. Other than that, school has just gotten in the way. After Easter break I should have more time since I will be done with some prior obligations so I have plans to do it then.
As far as the axle hunting goes, I have not found anything worth buying/trading for so it looks like I will be going to a junk yard in early may. If I find an axle with 4.10s then I will swap it right in and change the gears when funds permit. If I do not find an axle with 4.10s then I will wait to swap it in and re-gear it first.
I have a job already lined up for summer so if I secure that then I will be well on my way.
Other small projects include re-enforcing the spare tire carrier and moving stuff around so 35s fit, building an overhead mount for my CB, and possibly tube fenders. I found a DIY kit that includes pre-bent tubes for all 4 fenders for $300 so I will probably be taking that route.
I still have a lot to do before I can start building and swapping but May will be here before I know it!
|03-22-2014 10:50 PM|
|03-21-2014 04:42 PM|
|yjJEEPyj||Gl on that barring change. Hate doing those|
|03-21-2014 10:35 AM|
So update: I drove my Jeep 4 hours to the mountains for school, and it surprisingly had no issues. when I got here however, my muffler began rattling and I think it is coming from the inside. Due to a lack of tools I took it to a mechanic to get the problem fixed and he told me that he does not fix mufflers so I would have to take it elsewhere for that. He also noted my rear U-bolts were loose and my front bearings were bad. He showed me what he was talking about, but I refuse to pay a mechanic to do anything I can do myself so I ordered bearings, and U-bolts and I am going to have to find a way to get that done using the resources I have.
To make things worse, as I was leaving the mechanic my sputtering and bogging down problem returned to haunt me so now I have to deal with that. I am considering the thought that it may be a clogged Cat so I am going to replace that along with the muffler. My plan is to use a hacksaw and chop the muffler and cat, and use claps to put the new ones on until I can get home and weld it in.
I will get some pics up soon. I just got the bearings yesterday and U-bolts should be here today
|03-21-2014 10:27 AM|
|03-10-2014 07:38 PM|
|yjJEEPyj||I personally had one of those benders. Didn't work for me one time. Even packed the tube with sand and heated it. Worked like garbage for me. Bought a jd2 bender. Never kinked a tube again|
|03-10-2014 11:50 AM|
|03-09-2014 01:19 AM|
|yjJEEPyj||I have Been Gone for a while. Glad 2 see You have kept at your jeep. sorry to hear about the Axle. Should a just bought my Set up :C. 8.8's Are so common around me.|
|02-17-2014 03:52 PM|
|Zombiekiller||Just upsetting. Trying to source another one but that one was just so perfect.|
|02-17-2014 10:54 AM|
|GoldenSahara00||Lame. Sorry man.|
|02-17-2014 09:47 AM|
|Zombiekiller||So the guy with the axle bailed out on me when I started asking for to much info about the axle. probably something wrong with it. back to the drawing boards.|
|02-11-2014 01:40 PM|
|Zombiekiller||Yeah, I was back in forth with selling it, engine swap, or just regear. found this axle and decided to just go with the regear. also on my list of things to do is install a small BL 1-1.25" maximum, and maybe go to 35s. not sure yet though. and I want to build an overhead CB mount. that should be fairly straight forward.|
|02-11-2014 01:25 PM|
|GoldenSahara00||Awesome Chris. You got a good deal.|
|02-11-2014 01:21 PM|
|Zombiekiller||Heard back today! Moving forward with that, I'll be getting it In March. Can't remember if I said it had a spool or not, but it does, so that will have to go. I'm told I can just swap in spider gears from another 8.8 though so I am just just going to do that.|
|02-10-2014 07:56 PM|
|Zombiekiller||Waiting on a response from the guy with the 8.8. once I hear back from him in confirmation my dad is going to pick up the axle, and I am going to order my front Ring and Pinion. Next I am going to order the adapter flange, and then the 8.8 shock mounts, and spring mounts. my goal is to have it all back by the time I get home from college so I can jump right into it and get it all in within the first 2 weeks|
|02-09-2014 11:05 PM|
|Zombiekiller||If I find a d44 with 4.88s already for a decent price I would consider it, but I don't see that happening so for now I will just regear to 4.88s most likely|
|02-09-2014 10:45 PM|
|GoldenSahara00||I knew you'd keep it I say front axle swap while you're at it.|
|02-09-2014 07:49 PM|
So I was planning on selling my Jeep in order to have a more capable ride to get to college, but I decided against it and instead I am just going to make mine better for highway driving. AKA regear! I found an 8.8 Trussed with a spool and 4.88s already installed for $250. While the spool will have to go, for that price you can't buy a trussed 8.8 for that price, much less one that is re-geared so I am going to take that route. So an 8.8 install is in my near future, and then a front regear to 4.88s. for the spool I will probably just go take spider gears out of an 8.8 in a junk yard and just use those.
other projects on the list are to reinforce my tire carrier, put a latch on instead of the pins, and put a better hinge on.
I am at college right now, but I am still going to start gathering the pieces for this summer!
|11-10-2013 03:10 PM|
|Zombiekiller||the 50" is B-R-I-G-H-T!|
|11-10-2013 03:09 PM|
A bit late on this...
here is how she sits.
i am looking at selling this one to get a Rubicon, but we will see if i can manage to part!
|07-26-2013 02:16 PM|
|Zombiekiller||new updates, ill get pics soon, i forget if i said it or not but i put rock lights under it, and i installed the HIDs, they are bright! and the Halos are awesome. i also got my single row bar from Illuminationleds.com and mounted that on a homemade mount and its bright! im going wheeling tonight to play with all my new toys, when i get back ill upload pics of all the lights! still 8.8 hunting but im not having much luck at all|
|07-23-2013 12:34 PM|
|JeePersCreePit||Wow, great build thread. Looks like you have been through A LOT with her|
|06-29-2013 11:03 AM|
|wranglerbrother||nice looking build man! You have done some awesome stuff I must say! Keep it up!|
|06-29-2013 08:39 AM|
|Zombiekiller||That's what I'm looking at... Also maybe a 350... Idk yet we will see! I also put my HID headlights in, I can't remember if I said that but I'll take pics and post them later tonight, and I'm putting my 50" on later|
|06-28-2013 12:22 AM|
|Squeeze||What are you planning on swapping in? *coughdieselcough*|
|06-27-2013 09:01 PM|
|Zombiekiller||New plan: I'm keeping my jeep and doing an engine swap. This should get exciting... Also my HIDs are in and I think one of my sensors is messed up|
|06-22-2013 03:08 PM|
|Zombiekiller||my terrible rational: inspite of the fact that im trying to sell it i already ordered the new lights so im going to go ahead and install them when they get here! if i do sell it though i plan to take the 50" off|
|06-21-2013 03:38 PM|
|Zombiekiller||if i dont sell this one soon and end up keeping it ill let you guys know!|
|06-21-2013 03:30 PM|
That's a shame. Well, you have the practice, knowledge and memory though. And i am sure this is a thread to stand the time.
Let us know when you have a new project: you keep them up really well.
|06-21-2013 03:25 PM|
|Zombiekiller||unfortunatelly i am in the process of trying to sell it, parents want to get me a new jeep for college. im looking at a silver rubi|
|This thread has more than 30 replies. Click here to review the whole thread.|