|06-15-2013 03:05 AM|
Well guys, I made 'er back. 12:45am and it was COLD! They held together but I think I'll have to operate on 'em in the next little while. Have to just keep it around town or in the garage until then.
Thanks for your input and if you have anymore... By all means....
|06-14-2013 11:56 PM|
|06-14-2013 11:53 PM|
|06-14-2013 11:33 PM|
|4Jeepn||replace both sides as soon as you can and might do the driveshaft joints as well...if you have duct tape with ya I suppose you could wrap the area over the caps enough to perhaps give some extra help to get home with..though not sure how much that would help.|
|06-14-2013 11:32 PM|
|RedSurveyor||Oh that's not cool!! I hope I'm a little luckyer than that.|
|06-14-2013 11:27 PM|
|IslandTJ||For me, I limped home after wheeling and the cap completely came off and the trunnion slopped and gouged the yoke and kept hitting the wheel bearing bolts, effectively filing away all 3 bolt heads...|
|06-14-2013 10:21 PM|
|RedSurveyor||Wondering how bad can they be before having a serious problem?|
|06-14-2013 10:13 PM|
|IslandTJ||Yup, axle u-joints.|
|06-14-2013 10:04 PM|
Posible u joint??
Hey guys I know there have been plenty of "what does this sound like" questions posted and I know I've even seen this same one but can't find it in the app.
97 4.0 5speed.. 30&35's on axles... New front drive shaft u joints and knuckle.
At first while turning I would get a tick tick sound from the front. Now it has turned into a tick tick while driving straight and big time while turning.
I'm thinking axle u joints but don't know. Right now I'm 30 miles from home on a date with the wife. Hope I get home.