|07-06-2013 06:52 PM|
So I think I found the problem.
There a piece of foam missing on the passenger side. I am going to put a piece of weather stripping on it. Hopefully that would solve the problem.
|07-04-2013 07:48 AM|
|Putzy||I just went by the video as well. Everything closed up nice and tight It is only on the passenger side that it leaks. I'm going to contact best top and see if they can sen me longer bows. To me it seems as if the top should be farther out of the rubber channel on the windshield. It's not really a leak its more like there's a hole thee because alot of water sprayed into the jeep from that corner. It's driving me crazy!!! I used my friends top last year and did not have any issues with her top so I don't know what's going in with this one.|
|07-03-2013 08:50 PM|
Sorry I didn't take a picture of mine yet....it's currently opened in sunrider mode
|07-03-2013 06:46 PM|
Ok... after a yet unresolved leak at the rear corner of both back doors issue, I can comment on some of the other issues folks have addressed during my unfinished run at Bestop.
To the OP. as others have pointed out here, your install is way way off. I suggest taking it all off and starting again. Ditch the paper instructions and follow the youtube video with your finger over the pause button. I bet you will find nothing wrong with the top.
To Putzy, mine was exactly like yours (and really hard to latch) Bestop sent me new bows that were longer. While it still shows rubber it lines and latches up much better now.
I really like the channel slider for the rear window. A quick snap and slide and done.
|07-03-2013 05:18 PM|
I am sorry but can be no more help than that as I understand the JK Frameless are a little different than the TJs. So don't want to try tell you how to do it
|07-03-2013 02:03 PM|
|07-03-2013 01:59 PM|
|4X4Lady||Nope that's definitely not right...can't post a picture of mine right now but I will later tonight when I get home.|
|07-03-2013 12:58 PM|
Could someone post pics of the outside corners where the header meets the channel?
Here is a pic of mine. I feel like it's not actually in the header channel.
|07-03-2013 12:52 PM|
|Putzy||I just installed mine last week and we got heavy rain the other day and my front passenger side was soaking wet. SO today I went to the car wash to see if it would happen again and it did!!! It's coming from the upper corner between the door and the channel from the windshield (I think). It actually sprayed into the jeep and the water almost hit me!! Anyone else having this problem? Soo annoying!!!|
|06-18-2013 12:50 PM|
I've got the Trektop NX for my 2013 2 Dr. I love it! No flapping and no leaks for the 2 months I ran it. I just put the hard top back on for the Houston summer. The little slit you make in the roll bar pad is completely inconsequential. It's to accommodate the spring bracket which stays on when you replace the hardtop. If you look around at the zippered padding you will find several slits there from the factory, really no big deal. BTW I made the same mistake at first with the tension wire not routed under the screw and outside the door surround. The edges would not stay in the rain channel but as soon as I got that straight it was perfect.
This frame-less top is minimal coverage. It looks great and functions well but it's not a high-dollar top. I think most people are disappointed because they expect too much from it. Either they have never had a soft top at all or they want it to be equal to a premium top. When installed properly, it provides basic weather coverage, versatility, and good looks.
|06-18-2013 12:28 PM|
Just to check back in, I have been unable to get in contact with Bestop about this leaky seam issue. I guess I'll have to call them... I would like this issue addressed soon, since it has been raining frequently in my area these past few days.
I haven't been having any wind noise issues or the top not sitting right. I'm actually quite impressed with it and it doesn't look bad either. Just these leaky zippers...
|06-17-2013 05:17 AM|
Yes hardware does need to come off for reinstall of the HT however it is basically door surrounds......I think the clips for tailgate bar would be fine.....Good Luck!!
|06-16-2013 11:48 PM|
|06-16-2013 01:33 PM|
The Frameless from Bestop on my TJ is as quiet as the factory ST on the wife's JK.
With the design of the frameless, you can run it as a Safari top/ Full top/ add a duster and wrap around jammer and pretty much close it in for summer time use....but still have the "option" to use the sunrider or remove completely from the Safari/ duster/ jammer mode and stow under duster and take it with you without losing any room.
The "safari mode" gives you more protection than the Bikini and is quieter for theJK'S than the bikini top. Until we had the storms this past week was running the 3 piece deal and flipping the top back coming home from work.
have a few Pics but not a lot ------yet...
As for use in the winter...we don't need a HT we do go to Bundy hill in MI and South Haven Frequently through the winter.
Not sure which type Jeep/ JK you have....no cutting of padding was needed on my TJ.
Bottom line the Frameless is better than a Factory ST on a TJ or JK...well haven't had experience with the "premium" but it doesn't have all the "options" I get with a frameless....when the JK needs a new top it will be a Frameless from Bestop.
Sorry no pics with top flipped back.
|06-16-2013 12:33 PM|
|06-16-2013 10:46 AM|
Awesome!!! Glad you & the wife got it fixed. I know you will enjoy it now.
It really is a great top.
|06-16-2013 10:38 AM|
|Hillvol16||Thank you guys for all your suggestions... I let my wife loose on it and within 30 minutes she had the whole top checked out and fixed. Can I say badass? The cable was not wrapped under the bolt, the cable spring was hooked backwards and it was in the wrong hole on the cable bracket. I will be attempting to get a refund from that store tomorrow.|
|06-16-2013 10:20 AM|
The only thing I don't like is the way the rear window connects to the top. It uses a channel rather than a zipper and it can be aggravating to put the rear window in.
Mine is nearly as quiet as the hard top with no flapping. I like how easy and quick it is to open the top but it would be nice if it were easier to completely remove the top.
I don't have any pics with the windows out yet but I am very satisfied with the top.
|06-16-2013 10:02 AM|
|4X4Lady||I just purchased one of these on Friday & it should be here later this week, but I'm debating if I even want it now. For those of you that have one, can you tell me the pros & cons of it? What are the different ways you can use it? Are you using it in place of a hard top all year round? Anyone care to post some pictures of the features (sunrider look, without the windows, etc.)? Thanks|
|06-16-2013 09:53 AM|
|s.champ||They screwed it up. I put mine on about a month ago and it is tight with no leaks. How many trek top NX have they installed? They should have followed the video that is on-line. I love my top !!|
|06-16-2013 09:18 AM|
|AMilton||Notice how the bracket is lower than the roll bar. If yours is higher than the roll bar it is installed on the wrong side.|
|06-16-2013 09:02 AM|
Can you take a pic of the brackets the cable springs are hooked to? You would need to remove the side panels to see the brackets.
If the brackets are installed wrong it should be a fairly easy fix.
Flip the top open, remove the side panels, unzip the roll bar padding, swap the brackets, hook the cables to the brackets.
1 wrench or socket and probably about 30 minutes of time is all that's needed.
|06-16-2013 08:06 AM|
|Hillvol16||The thing that makes me the maddest is the guy looked me in the eye and stated that is how it is supposed to look. Me being a newbie I new something was wrong but I didn't have the knowledge to argue. Thanks to you guys and this forum that is no longer the case|
|06-15-2013 09:42 PM|
|Hillvol16||I will be taking the Jeep back to the place I had it done on Monday and we will see what they say.|
|06-15-2013 09:29 PM|
|06-15-2013 08:18 PM|
Following the included instructions I had mine reversed when I first installed it.
|06-15-2013 06:02 PM|
|06-15-2013 06:00 PM|
|06-15-2013 05:01 PM|
|matthew87||I say go the quadratec's NX page to get the instructions and start over.|
|06-15-2013 03:32 PM|
|ThermalFZ6||Check the front and rear bows to make sure they are seated right and check the tube that goes across the middle in front of the sound bar. Something is not seated right. I have one of these tops too and it is perfect, no leaks and the top should sit in the channels along the sides like Das_Jeep posted.|
|This thread has more than 30 replies. Click here to review the whole thread.|