Jeep Wrangler Forum - Reply to Topic
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > TJ Jeep Wrangler Forum > TJ Tech Forum > check your rear diff gear bolts

Join Wrangler Forum Today


Thread: check your rear diff gear bolts Reply to Thread
Title:
  
Message:
Post Icons
You may choose an icon for your message from the following list:
 

Register Now

In order to be able to post messages on the Jeep Wrangler Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
06-17-2013 11:30 AM
freeskier Get a new set of bolts, pull the carrier and replace them all. Use Redloctite and torque to spec. When torquing the bolts go in a star pattern and work your way up in torque.
06-17-2013 11:02 AM
flynbyu yea i have to fish the rest of that bolt out. it could of have been very UGLY
06-17-2013 10:50 AM
Cons_Table Ive dealt with this headache before...except mine went one step further. Took a short local trip on a simple trail (can be done in 2WD)...and had the most problems I have ever had on the trail (go figure). As I was pulling back into town, a guy with me said "hey I think you are leaking something, because we got splattered with something when you went around that corner." I did a quick inspection, but didnt see anything. Made my way home, went inside for a bit, then came back out to a giant puddle of gear oil in the driveway. One of my ring gear bolts backed all the way out, and had actually punched a hole in my diff cover. Thankfully, I hadn't installed an aftermarket cover yet, or else I probably wouldnt have found out til it was too late. I pulled the carrier, and out of like 10 bolts, 5 of them had come out half way and the other 5 were hand tight. I took the carrier down to my buddy's shop where the work was done and they said they had never seen anything like that happen before. They have done all of their gear work with the same guy for like 10 years and never had an issue like this (including race rigs and buggies). In those 10 years, they have only had two incidents...one being mine...of course haha. Anyways, the ring gear bolts appeared to have a little loctite left on them...so to this day, we arent sure what happened. But it is fixed...and havent had an issue since.
06-17-2013 10:36 AM
Jerry Bransford Jeep uses Locktite on the ring gear bolts, my bet is someone else was inside that rear axle & forgot/didn't know to use locktite on the bolts.
06-17-2013 09:21 AM
flflash If you found one loose or fallen out your a lucky man if there's no other damage!
Personally I'd get a new set of bolts and replace all of them you have no idea how much the others have been stressed. Make sure you clean the threads and bolt holes with brake clean use Loctite and torque to specs when replacing ring gear bolts!
06-17-2013 09:16 AM
flynbyu
check your rear diff gear bolts

I was lifting and going through my recently purchased 97 tj and in the process decided to do the rear diff fluid. When draining it I found 1 of the grade 8 bolts that hold the gears together had backed out and broke. luckily it must of have been recently as the gears were in good shape and the bolt head looked like it only got whacked once or twice. I checked all the others and they were all loose and needed to be tightened. If u r changing your rear diff fluid i would check these, as every 1 was loose and jeep do not use any threadlock on them. My buddy who owns a 97 tj was their and we r going to check his this wknd.

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -5. The time now is 06:04 PM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC